| Code |
Name |
| ANSI E1.16-2002 |
Entertainment Technology - Configuration Standard for Metal-Halide Ballast Power Cables |
| ANSI E1.27-1-2006 |
Entertainment Technology - Standard for Portable Control Cables for use with ANSI E1.11 (DMX512-A) and USITT DMX512/1990 Products |
| ANSI J-STD-042-2002 |
Emergency Alert Message for Cable |
| ANSI T1.307-2003 |
Telecommunications - Fire Resistance Criteria - Ignitability Requirements for Equipment Assemblies and Fire Spread Requirements for Wire and Cable |
| ANSI/AAMI EC53-1995 |
ECG Cables and Wires |
| ANSI/AAMI EC53A-1998 |
ECG Cables and Wires |
| ANSI/API SPEC17E-2003 |
Specification for Subsea Umbilicals |
| ANSI/ASTM A523-1996 |
Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits |
| ANSI/ASTM D1047-1995 |
Specification for Poly(Vinyl Cholride) Jacket for Wire and Cable (10.01) |
| ANSI/ASTM D1351-2002 |
Specification for Thermoplastic Polyethylene Insulation for Electrical Wire and Cable |
| ANSI/ASTM D1523-2000 |
Specification for Synthetic Rubber Insulation for Wire and Cable, 90°C Operations (10.01) |
| ANSI/ASTM D2219-2002 |
Poly(Vinyl Chloride) Insulation for Wire and Cable, 60°C Operation, Specification for (10.01) |
| ANSI/ASTM D2220-2002 |
Poly(Vinyl Chloride) Insulation for Wire and Cable, 75°C Operation, Specification for (10.01) |
| ANSI/ASTM D2308-2002 |
Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable |
| ANSI/ASTM D2633-2002 |
Methods of Testing Thermoplastic Insulations and Jackets for Wire and Cable |
| ANSI/ASTM D2655-2000 |
Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000 V |
| ANSI/ASTM D2656-2000 |
Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 2001 to 35V (10.02) |
| ANSI/ASTM D2768-1995 |
Specification for General-Purpose Ethylene-Propylene Rubber Jacket for Wire and Cable (10.02) |
| ANSI/ASTM D2770-2001 |
Specification for Ozone-Resisting Ethylene-Propylene Rubber Integral Insulation and Jacket for Wire and Cable |
| ANSI/ASTM D2802-2003 |
Specification for Ozone-Resistant Ethylene-Propylene Rubber Insulation for Wire and Cable |
| ANSI/ASTM D3485-2002 |
Specification for Smooth-Wall Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable |
| ANSI/ASTM D3554-2001 |
Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable |
| ANSI/ASTM D3555-2001 |
Specification for Track-Resistant Black Crosslinked Thermosetting Polyethylene Insulation for Wire and Cable |
| ANSI/ASTM D4244-1995 |
Specification for General-Purpose, Heavy-Duty and Extra-Heavy Duty Acrylonitrile-Butadiene Polyvinyl Chloride (NBR PVC) Jackets for Wire and Cable (10.02) |
| ANSI/ASTM D4245-2002 |
Specification for Ozone-Resistant Thermoplastic Elastomer Insulation for Wire and Cable 90oC Dry/75oC Wet Operation |
| ANSI/ASTM D4246-2002 |
Specification for Ozone-Resistant Thermoplastic Elastomer Insulation for Wire and Cable, 90oC Operation |
| ANSI/ASTM D4313-2003 |
Specification for General Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorinated Polyethylene Jackets for Wire and Cable |
| ANSI/ASTM D4314-1999 |
Specification for General Purpose Heavy-Duty and Extra-Heavy-Duty Crosslinked Chlorosulfonated Polyethylene Jackets for Wire and Cable (10.02) |
| ANSI/ASTM D4363-1998 |
Specification for Thermoplastic Chlorinated Polyethylene Jacket for Wire and Cable |
| ANSI/ASTM D4565-1999 |
Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable (10.02) |
| ANSI/ASTM D4566-1998 |
Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable (10.02) |
| ANSI/ASTM D4568-1999 |
Test Methods for Evaluating Compatibility Between Cable Filling and Flooding Compounds and Polyolefin Cable Materials (10.02) |
| ANSI/ASTM D470-2005 |
Methods of Testing Crosslinked Insulations and Jackets for Wire and Cable (10.01) |
| ANSI/ASTM D4730-2002 |
Specification for Flooding Compounds for Telecommunications Wire and Cable |
| ANSI/ASTM D4731-2002 |
Specification for Hot-Application Filling Compounds for Telecommunications Wire and Cable |
| ANSI/ASTM D4732-2002 |
Specification for Cool-Application Filling Compounds for Telecommunications Wire and Cable |
| ANSI/ASTM D4872-1999 |
Test Method for Dielectric Testing of Wire and Cable Filling Compounds |
| ANSI/ASTM D5424-2005 |
Test Method for Smoke Obscuration Caused by Burning Cables in a Vertical Configuration (10.02) |
| ANSI/ASTM D5537-2003 |
Test Method for Heat Release, Flame Spread and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration |
| ANSI/ASTM D6070-2002 |
Test Methods for Physical Properties of Smooth-Wall, Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable |
| ANSI/ASTM D6096-2002 |
Specification for Poly(vinyl Chloride) Insulation for Wire and Cable, 90 C Operation |
| ANSI/ASTM D6113-2003 |
Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables |
| ANSI/ASTM D866-1999 |
Specification for Styrene-Butadiene (SBR) Synthetic Rubber Jacket for Wire and Cable (10.01) |
| ANSI/ASTM F1835-1997 |
Guide for Cable Splicing Installations |
| ANSI/ASTM F1837M-1997 |
Specification for Heat-Shrink Cable Entry Seals (Metric) |
| ANSI/ASTM F1883-2003 |
Practice for Selection of Wire and Cable Size, in AWG or Metric Units |
| ANSI/CEA 2030-2005 |
Multi Room Audio Cabling Standard |
| ANSI/CEA 600.33-1997 |
Coax Cable Physical Layer and Medium Specification |
| ANSI/EIA 364-101-2000 |
Attenuation Test Procedure for Electrical Connectors, Sockets and Cable Assemblies or Interconnection Systems |
| ANSI/EIA 364-102-1998 |
Rise Time Degradation Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnection Systems |
| ANSI/EIA 364-107-2000 |
Eye Pattern and Jitter Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnection Systems |
| ANSI/EIA 364-108-2000 |
Impedance, Reflection Coefficient, Return Loss, and VSWR Test Procedure Measured in the Time and Frequency Domain for Electrical Connectors, Cable Assemblies or Interconnection Systems |
| ANSI/EIA 364-38B-1999 |
Electric Connectors - Cable Pull-Out Test |
| ANSI/EIA 364-41A-1984 |
Electric Connectors - Circular Jacket Cable Flexing Test Procedure |
| ANSI/EIA 364-41C-1999 |
TP-41 Cable Flexing Test Procedure for Electrical Connectors |
| ANSI/EIA 364-43B-2000 |
Cable Clamping (Bending Moment) Test Procedure for Electrical Connectors |
| ANSI/EIA 403-A-1990 |
Precision Coaxial Connectors for CATV Application (75 Ohms) |
| ANSI/EIA 429-1976 |
Connectors, Electrical Flat Cable Type, General Specification for |
| ANSI/EIA 600.33-1997 |
Coax Cable Physical Layer and Medium Specification |
| ANSI/EIA 700AOAE-2000 |
Detail Specification for Trapezoidal Connectors with Non-Removable Ribbon Cable Contacts on 1.27 mm Pitch Double Row Used with Single Connector Attachments (SCA2) |
| ANSI/EIA 700AOAF-2000 |
Detail Specification for Trapezoidal Shielded Connector 0.8 mm Pitch Used with Very High Density Cable Interconnect (VHDCI) |
| ANSI/EIA-364-101-2000 |
Attenuation Test Procedure for Electrical Connectors, Sockets and Cable Assemblies or Interconnection Systems |
| ANSI/EIA-364-102-1998 |
Rise Time Degradation Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnection Systems |
| ANSI/EIA-364-103-1998 |
Propogation Delay Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnection Systems |
| ANSI/EIA-364-107-2000 |
Eye Pattern and Jitter Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnection Systems |
| ANSI/EIA-364-108-2000 |
Impedance, Reflection Coefficient, Return Loss, and VSWR Test Procedure Measured in the Time and Frequency Domain for Electrical Connectors, Cable Assemblies or Interconnection Systems |
| ANSI/EIA-364-38B-1999 |
Cable Pull-Out Test Procedure for Electrical Connectors |
| ANSI/EIA-364-41C-1999 |
TP-41 Cable Flexing Test Procedure for Electrical Connectors |
| ANSI/EIA-364-43B-2000 |
Cable Clamping (Bending Moment) Test Procedure for Electrical Connectors |
| ANSI/EIA-700AOAE-2000 |
Detail Specification for Trapezoidal Connectors with Non-Removable Ribbon Cable Contacts on 1.27 mm Pitch Double Row Used with Single Connector Attachments (SCA2) |
| ANSI/EIA-700AOAF-2000 |
Detail Specification for Trapezoidal Shielded Connector 0.8 mm Pitch Used with Very High Density Cable Interconnect (VHDCI) |
| ANSI/EIA/TIA -455-104A-1993 |
Fiber Optic Cable Cyclic Flexing Test |
| ANSI/EIA/TIA 455-6B-1992 |
Cable Retention Test Procedure for Fiber Optic Cable Interconnecting Devices |
| ANSI/EIA/TIA-455-37-1993 |
Fiber Optic Cable Bend Test, Low and High Temperature |
| ANSI/ICEA P-54-440-2002 |
Ampacities of Cables Installed in Cable Trays |
| ANSI/ICEA S-101-699-2001 |
Category 3 Individually Unshielded Twisted Pair Indoor Cable For Use In General Purpose Non-LAN Telecommunications Wiring Systems Technical Requirements |
| ANSI/ICEA S-103-701-2004 |
Riser Cable |
| ANSI/ICEA S-105-692-2004 |
600 Volt Single Layer Thermoset Insulated Utility Underground Distribution Cables |
| ANSI/ICEA S-108-720-2004 |
Standard for Extruded Insulation Power Cables Rated Above 46 through 345 KV |
| ANSI/ICEA S-532-1973 |
Control, Thermocouple Extension and Instrumentation Cables |
| ANSI/ICEA S-70-547-2000 |
Weather-Resistant Polyolefin-Covered Wire and Cable |
| ANSI/ICEA S-76-474-2005 |
Neutral-Supported Power Cable Assemblies with Weather-Resistant Extruded Insulation Rated 600 Volts |
| ANSI/ICEA S-80-576-2002 |
Category 1 & 2 Individually Unshielded Twisted Pair Indoor Cables (With or Without an Overall Shield) for Use in Communications Wiring Systems Technical Requirements |
| ANSI/ICEA S-81-570-2005 |
Standard for 600 Volt Cables of Ruggedized Design |
| ANSI/ICEA S-84-608-2002 |
Telecommunications Cable Filled, Polyolefin Insulated, Copper Conductor - Technical Requirements |
| ANSI/ICEA S-85-625-2002 |
Aircore, Polyolefin Insulated, Copper Conductor Telecommunications Cable - Technical Requirements |
| ANSI/ICEA S-86-634-2004 |
Telecommunications Cable Buried Distribution and Service Wire - Technical Requirements |
| ANSI/ICEA S-87-640-1999 |
Optical Fiber Outside Plant Communications Cable |
| ANSI/ICEA S-90-661-2002 |
Individually Unshielded Twisted Pair Indoor Cables for Use In Communication Wiring Systems - Technical Requirements |
| ANSI/ICEA S-94-649-2005 |
Concentric Neutral Cables Rated 5,000-46,000 Volts |
| ANSI/ICEA S-97-682-2000 |
Utility Shielded Power Cables Rated 5000 - 46,000 Volts |
| ANSI/ICEA S-98-688-1997 |
Broadband Twisted Pair Cable Aircore, Polyolefin Insulated, Copper Conductor |
| ANSI/ICEA S-99-689-1997 |
Broadband Twisted Pair Cable Filled, Polyolefin Insulated, Copper Conductor |
| ANSI/ICEA T-26-465-2000 |
Guide for Frequency of Sampling Extruded Dielectric Power, Control, Instrumentation, and Portable Cables for Test |
| ANSI/IEEE 1017-2004 |
Recommended Practice for Field Testing Electric Submersible Pump Cable |
| ANSI/IEEE 1018-2004 |
Recommended Practice for Specifying Electric Submersible Pump Cable - Ethylene-Propylene Rubber Insulation |
| ANSI/IEEE 1019-2004 |
Recommended Practice for Specifying Electric Submersible Pump Cable - Polypropylene Insulation |
| ANSI/IEEE 1073.3.2-2000 |
Medical Device Communications - Transport Profile - IrDA Based - Cable Connected |
| ANSI/IEEE 1120-2004 |
Guide to the Factors to Be Considered in Planning, Design, and Installation of Submarine Power and Communication Cable |
| ANSI/IEEE 1143-1994 |
Guide on Shielding Practice for Low Voltage Cables |
| ANSI/IEEE 1185-1994 |
Guide for Installation Methods for Generating Station Cables |
| ANSI/IEEE 1202-1991 |
Flame Testing of Cables for Use in Cable Tray in Industrial and Commercial Occupancies |
| ANSI/IEEE 1210-2004 |
Standard Tests for Determining Compatibility of Cable Lubricants with Wire and Cable |
| ANSI/IEEE 1235-2000 |
Guide for the Properties of Identifiable Jackets for Underground Power Cables and Ducts |
| ANSI/IEEE 1242-1999 |
Guide for Specifying and Selecting Power, Control and Special Purpose Cable for Petroleum and Chemical Plants |
| ANSI/IEEE 1299/C62.22.1-1996 |
Guide for the Connection of Surge Arresters to Protect Insulated, Shielded Electric Power Cable Systems |
| ANSI/IEEE 1300-1997 |
Guide for Cable Connections for Gas Insulated Substations |
| ANSI/IEEE 1425-2001 |
Guide for the Evaluation of the Remaining Life of Impregnated Paper Insulated Transmission Cable Systems |
| ANSI/IEEE 1511-2004 |
Guide for Investigating and Analyzing Power Cable, Joint, and Termination Failures on Systems Rated 5kV Through 46 kV |
| ANSI/IEEE 383-2003 |
Standard for Qualifying Class 1E Electric Cables and Field Splices for Nuclear Power Generating Stations |
| ANSI/IEEE 400-2002 |
Direct Voltage Tests on Power Cables in the Field, Guide for Making |
| ANSI/IEEE 400.2-2004 |
Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF) |
| ANSI/IEEE 404-2000 |
Cable Joints for Use with Extruded Dielectric Cable Rated 5 000 - 138 000 V and Cable Joints for Use with Laminated Dielectric Cable Rated 2 500-500 000 V |
| ANSI/IEEE 48-1996 |
Standard Test Procedures and Requirements for High-Voltage Alternating-Current Cable Terminations |
| ANSI/IEEE 515-2004 |
Cables, Heating-Testing, Design, Installation, and Maintenance of Electrical Resistance Heat Tracing for Industrial Applications, Recommended Practice for |
| ANSI/IEEE 525-1993 |
Design and Installation of Cable Systems in Substations |
| ANSI/IEEE 576-2000 |
Recommended Practice for Installation, Termination, and Testing of Insulated Power Cable as Used in Industrial and Commercial Applications |
| ANSI/IEEE 628-2001 |
Raceway Systems for Class 1E Circuits for Nuclear Power Generating Stations, Criteria for the Design, Installation, and Qualification of |
| ANSI/IEEE 634-2004 |
Standard for Cable Penetration Fire Stop Qualification Test |
| ANSI/IEEE 635-2003 |
Guide for Selection and Design of Aluminum Sheaths for Power Cables |
| ANSI/IEEE 690-2004 |
Design and Installation of Cable Systems for Class 1E Circuits in Nuclear Power Generating Stations |
| ANSI/IEEE 835-1994 |
Power Cable Ampacity Tables |
| ANSI/IEEE 848-1996 |
Standard Procedure for the Determination of the Ampacity Derating of Fire Protected Cables |
| ANSI/IEEE C37.20.1a-2005 |
Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear - Amendment 1: Short-Time and Short-Circuit Withstand Current Tests; Minimum Areas for Multiple Cable Connections |
| ANSI/IPC WHMA-A-620-2002 |
Requirements and Acceptance for Cable and Wire Harness Asssemblies |
| ANSI/NECA 104-2006 |
Recommended Practice for Installing Aluminum Building Wire and Cable |
| ANSI/NECA 120-2005 |
Standard for Installing Armored Cable (Type AC) and Metal Clad Cable (Type MC) |
| ANSI/NECA 600-2003 |
Recommended Practice for Installing Medium Voltage Cable |
| ANSI/NEMA FB-1-2003 |
Fittings, Cast Metal Boxes, and Conduit Bodies for Conduit and Cable Assemblies |
| ANSI/NEMA VE1-2003 |
Metal Cable Tray Systems |
| ANSI/NEMA VE2-2000 |
Metal Cable Tray Installation Guidelines |
| ANSI/NEMA WC27500-2000 |
Aerospace and Industrial Electric Cable |
| ANSI/NEMA WC53-2000 |
Standard Test Methods for Extruded Dielectric Power, Control, Instrumentation, and Portable Cables for Test |
| ANSI/NEMA WC57-2004 |
Control, Thermocouple Extension and Instrumentation Cables |
| ANSI/NEMA WC63.2-1996 |
Performance Standard for Coaxial Premise Data Communications Cables |
| ANSI/NEMA WC66-2001 |
Performance Standard for Category 6 and Category 7 100 Ohm Shielded and Unshielded Twisted Pair Cables |
| ANSI/NEMA WC70-1999 |
Nonshielded Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy |
| ANSI/NEMA WC71-1999 |
Nonshielded Cables Rated 2001-5000 Volts for Use in the Distribution of Electric Energy |
| ANSI/NEMA WC74-2000 |
5-46kV Shielded Power Cable for Use in the Transmission and Distribution of Electric Energy |
| ANSI/NFPA 262-2002 |
Standard Method of Test for Flame Travel and Smoke of Wires and Cables for Use in Air-Handling Spaces |
| ANSI/SAE J1067-1998 |
Seven-Conductor Cable |
| ANSI/SAE J1494-1997 |
Battery Booster Cables |
| ANSI/SAE J2394-1998 |
Seven-Conductor Cable for ABS Power |
| ANSI/SAE J560-1998 |
Seven Conductor Electrical Connector for Truck-Trailer Jumper Cables |
| ANSI/SCTE 03-2003 |
Test Method for Coaxial Cable Structural Return Loss |
| ANSI/SCTE 10-2001 |
Test Method for Flexible Coaxial Cable Impact Test |
| ANSI/SCTE 100-2004 |
Specification for 75 Ohm Smooth Aluminum Subscriber Access Cable |
| ANSI/SCTE 102-2005 |
Cable Retention Force Testing of Trunk & Distribution Connectors |
| ANSI/SCTE 103-2004 |
Test Method for DC Contact Resistance, Drop cable to F-Connectors and F81 Barrels |
| ANSI/SCTE 105-2005 |
Uni-Directional Receiving Device Standard for Digital Cable |
| ANSI/SCTE 107-2005 |
Embedded Cable Modem Device Specification |
| ANSI/SCTE 11-2001 |
Test Method for Aerial Cable Corrosion Protection Flow |
| ANSI/SCTE 12-2001 |
Center Conductor Bond to Dielectric for Trunk, Feeder and Distribution Coaxial Cables |
| ANSI/SCTE 13-2001 |
Dielectric Air Leakage Test Method For Trunk, Feeder and Distribution Coaxial Cable |
| ANSI/SCTE 15-2002 |
Specification for Trunk, Feeder, and Distribution Coaxial Cable |
| ANSI/SCTE 21-2002 |
Carriage of National Television System Committee (NTSC) Vertical Blinking Interval (VBI) Data in Cable Digital Transport Streams |
| ANSI/SCTE 24-18-2004 |
IPCablecom CMS to CMS Signaling |
| ANSI/SCTE 24-20-2005 |
Requirements for Preferential Telecommunications over IPCablecom Networks |
| ANSI/SCTE 25-1-2002 |
Hybrid Fiber/Coax Outside Plant Status Monitoring - Physical (PHY) Layer |
| ANSI/SCTE 25-2-2002 |
Hybrid Fiber/Coax Outside Plant Status Monitoring - Media Access Control (MAC) Layer |
| ANSI/SCTE 25-3-2005 |
Hybrid Fiber/Coax Outside Plant Status Monitoring Part 3: - PS to T Interface SCTE Subcommittee Code: HMS 022 |
| ANSI/SCTE 25-4-2002 |
Hybrid Fiber/Coax Outside Plant Status Monitoring Part 4: HMS Power Supply to Transponder Interface Acceptance Test |
| ANSI/SCTE 27-2003 |
Subtitling Methods for Broadcast Cable |
| ANSI/SCTE 33-2002 |
Diameter of Drop Cable |
| ANSI/SCTE 35-2004 |
Digital Program Insertion Cueing Message for Cable |
| ANSI/SCTE 37-2003 |
Hybrid Fiber/Coax Outside Plant Status Monitoring SCTE-HMS-ROOT Management Information Base (MIB) Definition |
| ANSI/SCTE 38-2-2005 |
Hybrid Fiber Coax/Outside Plant Status Monitoring SCTE-HMS-ALARMS-MIB Management Information Base (MIB) |
| ANSI/SCTE 38-3-2002 |
Hybrid Fiber Coax/Outside Plant Status Monitoring SCTE-HMS-COMMON-MIB Management Information Base (MIB) |
| ANSI/SCTE 38-4-2002 |
Hybrid Fiber Coax/Outside Plant Status Monitoring SCTE-HMS-PS-MIB Management Information Base (MIB) |
| ANSI/SCTE 38-5-2002 |
Hybrid Fiber/Coax Outside Plant Status Monitoring SCTE-HMS-FIBERNODE-MIB Management Information Base |
| ANSI/SCTE 38-7-2002 |
Hybrid Fiber/Coax Outside Plant Status Monitoring SCTE-HMS-Transponder Interface Bus (TIB)-MIB Management Information Base (MIB) Definition |
| ANSI/SCTE 38-8-2002 |
Hybrid Fiber/Coax Outside Plant Status Monitoring SCTE-HMS-DOWNLOAD-MIB Management Information Base (MIB) Definition |
| ANSI/SCTE 39-2002 |
Test Method for Static Minimum Bending Radius for Coaxial Trunk, Feeder, and Distribution Cables |
| ANSI/SCTE 40-2004 |
Digital Cable Network Interface Specification |
| ANSI/SCTE 48-2-2003 |
Test Procedure for Measuring Relative Shielding Properties of Active and Passive Coaxial Cable Devices Using H-P Magnetic Close Field Probe |
| ANSI/SCTE 48-3-2004 |
Test Procedure for Measuring Shielding Effectiveness of Braided Coaxial Drop Cable Using the GTEM Cell |
| ANSI/SCTE 50-2002 |
Test Procedure for Measuring Regularity of Impendance of Coaxial Cable |
| ANSI/SCTE 51-2002 |
Test Method for Determining Drop Cable Braid Coverage |
| ANSI/SCTE 57-2003 |
System Information for Satellite Distribution of Digital Television for Cable and MMDS |
| ANSI/SCTE 66-2003 |
Test Method for Coaxial Cable Impedance |
| ANSI/SCTE 71-2003 |
Specification for Braided, 75 ohm, Coaxial, Multi-Purpose Cable |
| ANSI/SCTE 72-2002 |
Test Method for Axial Load Temperature Cycling of Drop Cable/Connector Interface |
| ANSI/SCTE 73-2002 |
Test Method for Insertion Force of Connector to Drop Cable Interface |
| ANSI/SCTE 74-2003 |
Specification for Braided 75 Ohm Flexible RF Coaxial Drop Cable |
| ANSI/SCTE 87-1-2003 |
Graphic Symbols for Cable Telecommunications - Part 1: HFC Symbols |
| ANSI/SCTE 89-1-2004 |
IPCable2Home Standard Part 1: Cable Home Networking 1.0 |
| ANSI/SCTE 89-2-2005 |
IPCable2Home Standard Part 2 - Cable Home Networking 1.1 |
| ANSI/SCTE 96-2003 |
Cable Telecommunications Testing Guidelines |
| ANSI/SCTE 97-2004 |
Metadata Requirements for Video-On-Demand in Cable Networks |
| ANSI/SCTE 99-2004 |
Test Method For Axial Pull Connector/Drop Cable |
| ANSI/SCTE TP007-1998 |
Test Method for Coaxial Cable Structural Return Loss |
| ANSI/SMPTE 276M-1995 |
Television - Transmission of AES/EBU Digital Audio Signals Over Coaxial Cable |
| ANSI/TIA-455-162A-1999 |
Fiber Optic Cable Temperature-Humidity Cycling |
| ANSI/TIA-455-171-A-2001 |
Attenuation by Substitution Measurement for Short-Length Multimode Graded-Index and Single Mode Optical Fiber Cable Assemblies |
| ANSI/TIA-455-1B-1998 |
Cable Flexing for Fiber Optic Interconnecting Devices |
| ANSI/TIA-455-41A-1993 |
Compressive Loading Resistance of Fiber Optic Cable |
| ANSI/TIA-455-80-C-2003 |
Measuring Cutoff Wavelength of Uncabled Single-Mode Fiber by Transmitted Power |
| ANSI/TIA-455-81-B-2000 |
Compound Flow (Drip) Test for Filled Fiber Optic Cable |
| ANSI/TIA-455-84B-1992 |
Jacket Self-Adhesion (Blocking) for Fiber Optic Cable |
| ANSI/TIA-455-87B-1993 |
Knot Test for Fiber Optic Cable |
| ANSI/TIA-455-89B-1998 |
Jacket Elongation and Tensile Strength for Fiber Optic Cable |
| ANSI/TIA-568 -B.2-9-200x-2005 |
Commercial Building Telecommunications Cabling Standard - Part 2: - Balanced Twisted-Pair Cabling Components - Addendum 9 - Additional Category 6 Balance Requirements and Mesurement Procedures |
| ANSI/TIA-568-B-3-1-2002 |
Optical Fiber Cabling Components Standard - Addendum 1 - Additional Transmission Performance Specifications for 50/125 um Optical Fiber Cables |
| ANSI/TIA-568-B-3-2000 |
Transmission Performance Specifications for 4-pair 100 Ohm Category 5 Cabling |
| ANSI/TIA-568-B.1-1-2001 |
Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 1 - Minimum 4-Pair UTP and 4-Pair ScTP Patch Cable Bend Radius |
| ANSI/TIA-568-B.1-2-2003 |
Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 2 - Grounding and Bonding Specifications for Screened Horizontal Cabling |
| ANSI/TIA-568-B.1-2001 |
Commercial Building Telecommunications Cabling Standard |
| ANSI/TIA-568-B.1-3-2003 |
Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 3 - Supportable Distances and Channel Attenuation for Optical Fiber Applications by Fiber Type |
| ANSI/TIA-568-B.1-4-2003 |
Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 4 - Recognition of Category 6 and 850 nm laser-Optimized 50/125 Micron Multi-mode Fiber |
| ANSI/TIA-568-B.1-5-2004 |
Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 5 - Telecommunications Cabling for Telecommunications Enclosures |
| ANSI/TIA-568-B.2-1-2002 |
Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted Pair Components - Addendum 1 - Transmission Performance Specifications for 4-Pair 100 Ohm Category 6 Cabling |
| ANSI/TIA-568-B.2-11-2005 |
Commercial Building Telecommunications Cabling Standard - Part2: Balanced Twisted-Pair Cabling Components - Addendum 11: Specification for Increased Diameter of 4-Pair UTP and ScTP Cables |
| ANSI/TIA-568-B.2-2-2001 |
Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling |
| ANSI/TIA-568-B.2-2001 |
Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling |
| ANSI/TIA-568-B.2-3-2002 |
Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling - Addendum 3 - Additional Considerations for Insertion Loss and Return Loss Pass/Fail Determination |
| ANSI/TIA-568-B.2-4-2002 |
Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted Pair Cabling Components - Addendum 4 - Solderless Connection Reliability Requirements for Copper Connecting Hardware |
| ANSI/TIA-568-B.2-5-2003 |
Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted Pair Cabling Components - Addendum 5 |
| ANSI/TIA-568-B.2-6-2003 |
Commercial Building Telecommunicatins Cabling Standard - Part 2: Balanced Twisted-Pair Cabling Components - Addendum 6 - Category 6 Related Component Test Procedures |
| ANSI/TIA-758-1-1999 |
Customer-Owned Outside Plant Telecommunications Cabling |
| ANSI/TIA-758-A-2004 |
Customer-Owned Outside Plant Telecommunications Cabling |
| ANSI/TIA-854-2001 |
A Full Duplex Ethernet Physical Layer Specification for 1000Mb/s (1000BASE-TX) Operating Over Category 6 Balanced Twisted Pair Cabling |
| ANSI/TIA-862-2002 |
Building Automation Systems Cabling Standard for Commercial Buildings |
| ANSI/TIA/EIA 455-11C-2002 |
Vibration Test Procedure for Fiber Optic Components and Cables |
| ANSI/TIA/EIA 455-1B-1998 |
Cable Flexing for Fiber Optic Interconnecting Devices |
| ANSI/TIA/EIA 455-200-2001 |
Insertion Loss of Connectorized Polarization - Maintaining Fiber or Polarizing Fiber Pigtailed Devices and Cable Assemblies |
| ANSI/TIA/EIA 455-201-2001 |
Return Loss of Connectorized Polarization-Maintaining Fiber or Polarizing Fiber Pigtailed Devices and Cable Assemblies |
| ANSI/TIA/EIA 455-61A-2000 |
Measurement of Fiber or Cable Attenuation Using an OTDR |
| ANSI/TIA/EIA 455-80-C-2003 |
Measuring Cutoff Wavelength of Uncabled Single-Mode Fiber by Transmitted Power |
| ANSI/TIA/EIA 455-95A-2000 |
Absolute Optical Power Test for Optical Fibers and Cables |
| ANSI/TIA/EIA 472D000-A-1993 |
Sectional Specification for Fiber Optic Communications Cable for Outside Plant Use |
| ANSI/TIA/EIA 568-B-3-2000 |
Transmission Performance Specifications for 4-pair 100 Ohm Category 5 Cabling |
| ANSI/TIA/EIA 568-B.1-1-2001 |
Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 1 - Minimum 4-Pair UTP and 4-Pair ScTP Patch Cable Bend Radius |
| ANSI/TIA/EIA 568-B.1-2-2003 |
Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 2 - Grounding and Bonding Specifications for Screened Horizontal Cabling |
| ANSI/TIA/EIA 568-B.1-2001 |
Commercial Building Telecommunications Cabling Standard |
| ANSI/TIA/EIA 568-B.1-3-2003 |
Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 3 - Supportable Distances and Channel Attenuation for Optical Fiber Applications by Fiber Type |
| ANSI/TIA/EIA 568-B.1-4-2003 |
Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 4 - Recognition of Category 6 and 850 nm laser-Optimized 50/125 Micron Multi-mode Fiber |
| ANSI/TIA/EIA 568-B.2-1-2002 |
Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted Pair Components - Addendum 1 - Transmission Performance Specifications for 4-Pair 100 Ohm Category 6 Cabling |
| ANSI/TIA/EIA 568-B.2-2-2001 |
Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling |
| ANSI/TIA/EIA 568-B.2-2001 |
Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling |
| ANSI/TIA/EIA 568-B.2-3-2002 |
Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling - Addendum 3 - Additional Considerations for Insertion Loss and Return Loss Pass/Fail Determination |
| ANSI/TIA/EIA 568-B.2-4-2002 |
Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted Pair Cabling Components - Addendum 4 - Solderless Connection Reliability Requirements for Copper Connecting Hardware |
| ANSI/TIA/EIA 570-A-2-2002 |
Residential Telecommunications Cabling Standard - Addendum 2 - Control Cabling for Residences |
| ANSI/TIA/EIA 570-A-3-2002 |
Residential Telecommunications Cabling Standard - Addendum 3 - Whole-Home Audio Cabling for Residences |
| ANSI/TIA/EIA 758-1-1999 |
Customer-Owned Outside Plant Telecommunications Cabling |
| ANSI/TIA/EIA 758-1999 |
Customer-Owned Outside Plant Telecommunications Cabling |
| ANSI/TIA/EIA 854-2001 |
A Full Duplex Ethernet Physical Layer Specification for 1000Mb/s (1000BASE-TX) Operating Over Category 6 Balanced Twisted Pair Cabling |
| ANSI/TIA/EIA 862-2002 |
Building Automation Systems Cabling Standard for Commercial Buildings |
| ANSI/UL 1072-2006 |
Standard for Safety for Medium-Voltage Power Cables (Proposal dated February 24, 2006) |
| ANSI/UL 1277-2005 |
Standard for Safety for Electrical Power and Control Tray Cables with Optional Optical-Fiber Members (4th edition) |
| ANSI/UL 13-2005 |
Standard for Safety for Power-Limited Circuit Cables |
| ANSI/UL 1424-2005 |
Standard for Safety for Cables for Power-Limited Fire-Alarm Circuits |
| ANSI/UL 1426-2001 |
Cables for Boats |
| ANSI/UL 1569-2005 |
Standard for Safety for Metal-Clad Cables |
| ANSI/UL 1655-2004 |
Standard for Safety for Community-Antenna Television Cables |
| ANSI/UL 1666-2002 |
Test for Flame Propagation Height of Electrical and Optical-Fiber Cables Installed Vertically in Shafts |
| ANSI/UL 1682-1998 |
Standard for Safety for Plugs, Receptacles, and Cable Connectors, of the Pin and Sleeve Type |
| ANSI/UL 209-2005 |
Standard for Safety for Cellular Metal Floor Raceways and Fittings |
| ANSI/UL 2196-2004 |
Standard for Tests for Fire Resistive Cables |
| ANSI/UL 2225-2005 |
Standard for Safety for Cables and Cable-Fittings for Use in Hazardous (Classified) Locations |
| ANSI/UL 2239-2004 |
Standard for Hardware for the Support of Conduit, Tubing and Cable |
| ANSI/UL 2556-2005 |
Standard Test Methods for Wires and Cables (Bulletin) |
| ANSI/UL 4-2003 |
Armored Cable |
| ANSI/UL 44-2005 |
Rubber-Insulated Wires and Cables |
| ANSI/UL 444-2005 |
Standard for Safety for Communications Cables |
| ANSI/UL 493-1997 |
Thermoplastic-Insulated Underground Feeder and Branch-Circuit Cables |
| ANSI/UL 5-2003 |
Surface Metal Raceways and Fittings |
| ANSI/UL 568-2004 |
Standard for Safety for Nonmetallic Cable Tray Systems |
| ANSI/UL 5A-2003 |
Standard for Safety for Non-Metallic Surface Raceways and Fittings |
| ANSI/UL 5B-2004 |
Strut-Type Channel Raceways and Fittings |
| ANSI/UL 5C-2003 |
Standard for Safety for Surface Raceways and Fittings for Use with Data, Signal and Control Circuits |
| ANSI/UL 83-2003 |
Thermoplastic-Insulated Wires and Cables |
| ANSI/UL 854-2002 |
Service-Entrance Cables |
| ANSI/UL 884-2005 |
Standard for Safety for Underfloor Raceways and Fittings |
| ASTM A 523-1996 |
Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits |
| ASTM B 694-2003 |
Standard Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding |
| ASTM B 736-2000 |
Standard Specification for Aluminum, Aluminum Alloy and Aluminum-Clad Steel Cable Shielding Stock |
| ASTM B 784-2000 |
Standard Specification for Modified Concentric-Lay-Stranded Copper Conductors for Use in Insulated Electrical Cables |
| ASTM D 1047-1995 |
Standard Specification for Poly(Vinyl Chloride) Jacket for Wire and Cable |
| ASTM D 1248-2005 |
Standard Specification for Polyethylene Plastics Extrusion Materials For Wire and Cable |
| ASTM D 1351-2002 |
Standard Specification for Thermoplastic Polyethylene Insulation for Electrical Wire and Cable |
| ASTM D 1523-2000 |
Standard Specification for Synthetic Rubber Insulation for Wire and Cable, 90°C Operation |
| ASTM D 2219-2002 |
Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 60°C Operation |
| ASTM D 2220-2002 |
Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 75°C Operation |
| ASTM D 2308-2002 |
Standard Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable |
| ASTM D 2633-2002 |
Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable |
| ASTM D 2655-2000 |
Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000 V |
| ASTM D 2656-2000 |
Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 2001 to 35 000 V |
| ASTM D 2768-1995 |
Standard Specification for General-Purpose Ethylene-Propylene Rubber Jacket for Wire and Cable |
| ASTM D 2770-2001 |
Standard Specification for Ozone-Resisting Ethylene-Propylene Rubber Integral Insulation and Jacket for Wire and Cable |
| ASTM D 2802-2003 |
Standard Specification for Ozone-Resistant Ethylene-Alkene Polymer Insulation for Wire and Cable |
| ASTM D 3485-2002 |
Standard Specification for Smooth-Wall Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable |
| ASTM D 3554-2001 |
Standard Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable, 75oC Operation |
| ASTM D 3555-2001 |
Standard Specification for Track-Resistant Black Crosslinked Polyethylene Insulation for Wire and Cable, 90oC Operation |
| ASTM D 4244-1995 |
Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Acrylonitrile-Butadiene/Poly(Vinyl Chloride) (NBR/PVC) Jackets for Wire and Cable |
| ASTM D 4245-2002 |
Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90°C Dry/75°C Wet Operation |
| ASTM D 4246-2002 |
Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90°C Operation |
| ASTM D 4313-2003 |
Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorinated Polyethylene (CM) Jackets For Wire and Cable |
| ASTM D 4314-2005 |
Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorosulfonated Polyethylene (CSM) Jackets For Wire and Cable |
| ASTM D 4363-1998 |
Standard Specification for Thermoplastic Chlorinated Polyethylene (CM) Jacket for Wire and Cable |
| ASTM D 4565-1999 |
Standard Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable |
| ASTM D 4566-2005 |
Standard Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable |
| ASTM D 4568-1999 |
Standard Test Methods for Evaluating Compatibility Between Cable Filling and Flooding Compounds And Polyolefin Wire and Cable Materials |
| ASTM D 470-2005 |
Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable |
| ASTM D 4730-2002 |
Standard Specification for Flooding Compounds for Telecommunications Wire and Cable |
| ASTM D 4731-2002 |
Standard Specification for Hot-Application Filling Compounds for Telecommunications Wire and Cable |
| ASTM D 4732-2002 |
Standard Specification for Cool-Application Filling Compounds for Telecommunications Wire and Cable |
| ASTM D 4872-1999 |
Standard Test Method for Dielectric Testing of Wire and Cable Filling Compounds |
| ASTM D 532-1990 |
Natural Rubber Jacket for Wire and Cable |
| ASTM D 5424-2005 |
Standard Test Method for Smoke Obscuration of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration |
| ASTM D 5537-2003 |
Standard Test Method for Heat Release, Flame Spread, Smoke Obscuration, and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration |
| ASTM D 5875-1995 |
Standard Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices |
| ASTM D 6070-2002 |
Standard Test Methods for Physical Properties of Smooth-Wall, Coilable, Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable |
| ASTM D 6096-2002 |
Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 90°C Operation |
| ASTM D 6113-2003 |
Standard Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables |
| ASTM D 831-1994 |
Standard Test Method for Gas Content of Cable and Capacitor Oils |
| ASTM D 866-1999 |
Standard Specification for Crosslinked Styrene-Butadiene (SBR) Synthetic Rubber Jacket for Wire and Cable |
| ASTM E 585/E 585M-2004 |
Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Base Metal Thermocouple Cable |
| ASTM F 1835-1997 |
Standard Guide for Cable Splicing Installations |
| ASTM F 1837M-1997 |
Standard Specification for Heat-Shrink Cable Entry Seals (Metric) |
| ASTM F 1883-2003 |
Standard Practice for Selection of Wire and Cable Size in AWG or Metric Units |
| ASTM F 2180-2002 |
Standard Specification for Metallic Implantable Strands and Cables |
| UL 1063-1998 |
(Machine-tool wires and cables ) |
| UL 1072-1995 |
(Medium-voltage power cables ) |
| UL 1277-2001 |
(Electrical power and control tray cables with optional optical-fiber members ) |
| UL 13-1996 |
(Power-limited circuit cables ) |
| UL 1309-1995 |
(Marine shipboard cable ) |
| UL 1425-1998 |
(Cables for non-power-limited fire-alarm circuits ) |
| UL 1426-2001 |
(Electrical cables for boats ) |
| UL 1569-1999 |
(Metal-clad cables ) |
| UL 1581-2001 |
(Reference standard for electrical wires, cables, and flexible cords ) |
| UL 1651-1997 |
(Optical fiber cable ) |
| UL 1655-1997 |
(Community-antenna television cables ) |
| UL 1666-2000 |
(Test for flame propagation height of electrical and optical-fiber cables installed vertically in shafts ) |
| UL 1673-1996 |
(Electric space heating cables ) |
| UL 1682-2002 |
(Plugs, receptacles, and cable connectors, of the pin and sleeve type ) |
| UL 1685-1997 |
(Vertical-tray fire-propagation and smoke-release test for electrical and optical-fiber cables ) |
| UL 209-1998 |
(Cellular metal floor raceways and fittings ) |
| UL 2196-2001 |
(Tests for fire resistive cables ) |
| UL 2225-1996 |
(Metal-clad cables and cable-sealing fittings for use in hazardous (classified) locations ) |
| UL 2250-1999 |
(Instrumentation tray cable ) |
| UL 4-1996 |
(Armored cable ) |
| UL 44-1999 |
(Thermoset-insulated wires and cables ) |
| UL 444-2002 |
(Communications cables ) |
| UL 493-1995 |
(Thermoplastic-insulated underground feeder and branch-circuit cables ) |
| UL 5-1996 |
(Surface metal raceways and fittings ) |
| UL 568-2002 |
(Non-metallic cable tray systems ) |
| UL 5A-2003 |
(Nonmetallic surface raceways and fittings ) |
| UL 5C-1998 |
(Surface raceways and fittings for use with data, signal, and control circuits ) |
| UL 719-2002 |
(Nonmetallic-sheathed cables ) |
| UL 814-2004 |
(Gas-tube-sign and ignition cable ) |
| UL 83-2003 |
(Thermoplastic-insulated wires and cables ) |
| UL 854-1999 |
(Service-entrance cables ) |
