DIN cable standards
| Cable standard code | Name |
| DIN 14680-2-1984 | Hand-operated cable reels for a.c. and three-phase a.c. |
| DIN 14680-3-1978 | Hand-operated cable racks, for low tension (up to 42 volts) |
| DIN 15563-4-1993 | Special female sockets for connecting cables and switchboards for motion-picture and television studio use; single pole special socket for protective conductor |
| DIN 15564-4-1993 | Special male plugs for connecting cables and switchboards for motion-picture and television studio use; single pole special male plugs for protective conductor |
| DIN 15565-1-2000 | Electric power-distribution equipment for production workstations for film and television - Part 1: Cases, cables and connectors |
| DIN 15565-8-1998 | Electric power-distribution equipment for production workstations for film and television - Part 8: Multicore systems |
| DIN 16873-1997 | Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) for cable ducting - Dimensions and technical delivery conditions |
| DIN 16874-2000 | Pipes and fittings of high-density polyethylene (PE-HD) for cable ducting - Dimensions and technical delivery conditions |
| DIN 19003-1-1992 | Flash connector; connecting cable, plug, socket, connecting dimensions, requirements |
| DIN 22419-1-2004 | Electrical apparatus for potentially explosive atmospheres for mining - Cable entries - Part 1: Safety requirements and testing |
| DIN 22419-2-2004 | Electrical apparatus for potentially explosive atmospheres for mining - Cable entries - Part 2: Gland adaptors for entries; safety requirements and testing |
| DIN 22419-3-2004 | Electrical apparatus for potentially explosive atmospheres for mining - Cable entries - Part 3: Gland flanges for entries; safety requirements and testing |
| DIN 29571-2-1992 | Aerospace; electrical subsystems; identification of circuits, equipments and cables |
| DIN 29576-2-1987 | Aerospace; aircraft electrical systems; testing of electrical cables installed in aircraft |
| DIN 29896-1980 | Aerospace; shielded electrical cables, copper conductors, insulated shield, one to four conductors, 600 V, 150 and 260 °C, technical specification |
| DIN 29900-2-1980 | Aerospace; electrical cables, single conductor, aluminium, 600 V, 150 C, technical specification |
| DIN 4000-10-1986 | Tabular layouts of article characteristic for electrical cords, cables, wires and bunched enamelled copper wires |
| DIN 4000-14-1986 | Tabular layouts of article characteristics for cable sockets, plugs and cable splices |
| DIN 4102-12-1998 | Fire behaviour of building materials and building components - Part 12: Circuit integrity maintenance of electric cable systems; requirements and testing |
| DIN 4102-9-1990 | Fire behaviour of building materials and elements; seals for cable penetrations; concepts, requirements and testing |
| DIN 42500-21-1995 | Three phase oil-immersed distribution transformers 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Part 2: Distribution transformers with cable boxes on the high voltage and/or low voltage side; section 1: General requirements; German version HD 428.2.1 S1:1994 |
| DIN 42925-2004 | Terminal box cable entries for three-phase cage induction motors at rated voltages from 400 V to 690 V |
| DIN 43138-1980 | Flexible cables for overhead equipment and return current |
| DIN 43154-1977 | Open thimbles for wires and cables |
| DIN 43590-3-1990 | Lead-acid batteries; monobloc-batteries for starting internal; combustion engines; connection terminal and cable socket |
| DIN 43628-1998 | Fuseboxes for cable protection fuses |
| DIN 43629-1-1978 | Cable distribution cubicle; cabinet, mounting dimensions |
| DIN 43629-2-1978 | Cable distribution cubicle; base, mounting dimensions |
| DIN 43629-3-1982 | Cable distribution cubicle; internal construction; mounting dimensions |
| DIN 43722-1994 | Thermocouples; part 3: extension and compensating cables; tolerances and identification system (IEC 60584-3:1989, modified); German version HD 446.3 S1:1993 |
| DIN 45330-1974 | Antenna socket for cable for connecting receivers with aerials systems; principal dimensions |
| DIN 46211-1965 | Stamped Cable Sockets for Copper Conductors |
| DIN 46220-1965 | Cable sockets, hot pressed, cast for copper conductors |
| DIN 46221-1965 | Angle sockets, hot pressed, cast for copper conductors |
| DIN 46224-1982 | Stamped cable sockets for flexibles of carbon brushes |
| DIN 46225-1976 | Stamped terminals with embrace of the insulation for insulated cables |
| DIN 46227-1960 | Cable clamp sockets for copper conductors |
| DIN 46231-1970 | Pin type cable-sockets for solderless connections, insulated, for copper conductors |
| DIN 46235-1983 | Cable lugs; for compression connections, cover plate type, for copper conductors |
| DIN 46236-1964 | Stamped cable sockets with embrace of the insulation |
| DIN 46237-1970 | Crimp-type cable sockets for solderless connections, insulated, for copper conductors |
| DIN 46238-1985 | Springterminals for plastic insulated telecommunication cords |
| DIN 46252-1975 | Terminals for plastic insulated telecommunication cords |
| DIN 46295-3-1981 | Terminal board, square shaped with six slit-bolts; cable sockets |
| DIN 46329-1983 | Cable lugs; for compression connections, ring type, for aluminium conductors |
| DIN 46380-2002 | Manufacturing and transport of cables and wires - Definitions |
| DIN 46396-2-1986 | Containers for use in the manufacture of cables and wires, inner diameter above 500 mm |
| DIN 47264-1971 | Radio frequency cables, coaxial, with solid dielectric, Z=50 ; survey |
| DIN 47269-1971 | Radio frequency cables, coaxial, with solid dielectric, Z=75 ; survey |
| DIN 47370-1971 | Radio frequency cables 0,5/1,5, coaxial, with solid dielectric, high flexible Z=50 |
| DIN 47371-1971 | Radio frequency cables 0,9/3, coaxial, with solid dielectric, flexible Z=50 |
| DIN 47372-1971 | Radio frequency cables 1/3, coaxial, with solid dielectric, high flexible Z=50 |
| DIN 47373-1971 | Radio frequency cables 1,4/4,8, coaxial, with solid dielectric, flexible Z=50 |
| DIN 47374-1971 | Radio frequency cables 1,5/4,8, coaxial, with solid dielectric, high flexible Z=50 |
| DIN 47375-1971 | Radio-frequency cables 2,3/7,3, coaxial, with solid dielectric, high flexible Z=50 |
| DIN 47376-1971 | Radio frequency cables 3,4/11,5, coaxial, with solid dielectric, flexible Z=50 |
| DIN 47377-1971 | Radio frequency cables 3,6/11,5, coaxial, with solid dielectric, high flexible Z=50 |
| DIN 47378-1971 | Radio frequency cables 5/17,3, coaxial, with solid dielectric, flexible Z=50 |
| DIN 47380-1971 | Radio frequency cables 0,3/1,5, coaxial, with solid dielectric, flexible Z=75 |
| DIN 47381-1971 | Radio frequency cables 0,5/3, coaxial, with solid dielectric, flexible Z=75 |
| DIN 47382-1971 | Radio frequency cables 0,5/3, coaxial solid dielectric, flexible Z=75 |
| DIN 47383-1971 | Radio frequency cables 06,/3,7, coaxial, with solid dielectric, flexible Z=75 |
| DIN 47384-1971 | Radio frequency cables 0,6/3,7, coaxial, with solid dielectric, high flexible Z=75 |
| DIN 47385-1971 | Radio frequency cables 0,7/4,5, coaxial, with solid dielectric, flexible Z=75 |
| DIN 47386-1971 | Radio frequency cables, 0,8/4,5, coaxial, with solid dielectric, high flexible Z=75 |
| DIN 47387-1971 | Radio frequency cables 0,8/4,8, coaxial, with solid dielectric, flexible Z=75 |
| DIN 47388-1971 | Radio frequency cables 0,8/4,8, coaxial, with solid dielectric, high flexible Z=75 |
| DIN 47389-1971 | Radio frequency cables, 1/6,4, coaxial, with solid dielectric, flexible Z=75 |
| DIN 47390-1971 | Radio frequency cables 1,1/7,3, coaxial, with solid dielectric, flexible Z=75 |
| DIN 47391-1971 | Radio frequency cables 1,2/7,3, coaxial, with solid dielectric, high flexible Z=75 |
| DIN 47392-1971 | Radio frequency cables 1,8/11,5, coaxial, with solid dielectric, flexible Z=75 |
| DIN 47393-1971 | Radio frequency cables 1,9/11,5, coaxial, with solid dielectric, high flexible Z=75 |
| DIN 47394-1971 | Radio frequency cables 2,7/17,3, coaxial, with solid dielectric, flexible Z=75 |
| DIN 47600-1-1974 | Cast Metal Joint Boxes for Power Cables up to 10 kV; Protective Joint Boxes |
| DIN 47600-2-1974 | Cast Metal Joint Boxes for Power Cables up to 10 kV; Internal Joint Boxes |
| DIN 47600-3-1974 | Cast Metal Joint Boxes for Power Cables up to 10 kV; Correlation of Joint Boxes with Paper-insulated Cables; Correlation of Bare Stranded Copper Bonding Wire |
| DIN 47600-4-1974 | Cast Metal Joint Boxes for Power Cables up to 10 kV; Internal Design for Paper-insulated Cables |
| DIN 47600-5-1974 | Cast Metal Joint Boxes for Power Cables up to 10 kV; Installation Instructions for Paper-insulated Cables |
| DIN 47600-6-1974 | Cast Metal Joint Boxes for Power Cables up to 10 kV; Correlation of Joint Boxes with Plastic Insulated Cables 0.6/1 kV |
| DIN 47600-7-1974 | Cast Metal Joint Boxes for Power Cables up to 10 kV; Internal Design for Plastic Insulated Cables 0.6/1 kV |
| DIN 47606-1974 | Joint boxes for power cables up to 30 kV; joint protection boxes |
| DIN 47609-1989 | Cable distribution cabinets from plastic for outdoor use; requirements, tests |
| DIN 47612-1981 | Manner of counting at terminal systems for telecommunication cables |
| DIN 47617-1975 | Joint boxes for pressure gas supervised telecommunication cables, metal sheathed; internal joint boxes |
| DIN 47619-1-1979 | Splicing of telecommunication cables; cable with symmetrical stranding components |
| DIN 47622-1979 | Plastic sleeves for telecommunication cable-connecting sleeves |
| DIN 47624-2001 | Clamping closures of plastics for telecommunication cables with metallic conductors and optical fibres - Requirements and tests |
| DIN 47625-1980 | Cable terminal fitting for telecommunication systems, frequency range up to 4 kHz; requirements, tests |
| DIN 47626-1990 | Sheath-clamps for telecommunication cables; requirements, tests |
| DIN 47627-1986 | Solderless coreconnections in sleeves for telecommunication cables; requirements, tests |
| DIN 47628-1-1983 | Thermoplastic-clamping sleeves for telecommunication cables; dimensions |
| DIN 47628-2-1983 | Thermoplastic-clamping sleeves for telecommunication cables; allocation to the cables |
| DIN 47629-1986 | Pressure-tight blockstops for telecommunication cables; requirements, tests |
| DIN 47630-10-1972 | House junction boxes up to 1000 V; inner design for distribution cable NYY and house junction cable NYY |
| DIN 47630-11-1972 | House junction boxes up to 1000 V; installation instruction for distribution cable NYY and house junction cable NYY |
| DIN 47630-2-1972 | House junction boxes up to 1000 V; inner design for distribution cable NKBA and house junction cable NKBA |
| DIN 47630-3-1972 | House junction boxes up to 1000 V; installation instructions for distribution cable NKBA and house junction cable NKBA |
| DIN 47630-4-1972 | House junction boxes up to 1000 V; inner design for distribution cable NKBA and house junction cable NYCY |
| DIN 47630-5-1972 | House junction boxes up to 1000 V; installation instructions for distribution cable NKBA and house junction cable NYCY |
| DIN 47630-6-1972 | House junction boxes up to 1000 V; inner design for distribution cable NAKLEY and house junction cable NYCY |
| DIN 47630-7-1972 | House junction boxes, up to 1000 V; installation instructions for distribution cable NAKLEY and house junction cable NYCY |
| DIN 47630-8-1972 | House junction boxes up to 1000V; inner design for distribution cable NYCWY and house junction cable NYCY |
| DIN 47630-9-1972 | House junction boxes up to 1000 V; installation instruction for distribution cable NYCWY and house junction cable NYCY |
| DIN 47632-1-1978 | Joint boxes of heat-shrinking plastic-hose for plastic insulated power cables up to 1000 V; joint protection boxes |
| DIN 47632-2-1978 | Joint boxes of heat-shrinking plastic-hose for plastic insulated power cables up to 1000 V; internal joint boxes |
| DIN 47632-3-1978 | Joint boxes of heat-shrinking plastic-hose for plastic insulated power cables up to 1000 V; allocation of conductor cross sections |
| DIN 47632-4-1978 | Joint boxes of heat-shrinking plastic-hose for plastic insulated power cables up to 1000 V; internal construction |
| DIN 47633-1984 | Coaxial splices in telecommunication cables; requirements, tests |
| DIN 47634-1984 | Plastic heat shrinking sleeves, for telecommunication cables; requirements, tests |
| DIN 47635-1973 | Gasket grooves and folds for cast-metal cable fittings |
| DIN 47636-7-1990 | Bushing for separable accessories for power cable with protruding cone; U<(Index)m> up to 36 kV, dimensions of the arrangement for bushings and separable connectors |
| DIN 47642-1975 | Cast-metal cable sheathes for accessories |
| DIN 47643-1973 | Boxlid for cable fittings |
| DIN 47645-1989 | Plastic heat shrinking caps for telecommunication cables; requirements, tests |
| DIN 47661-2-1973 | Insulation bushings, group rings for plastic insulated communication cables |
| DIN 48031-1952 | Coils for cables and lines |
| DIN 48175-1-1978 | Roof poles for lead-in cables, type N, degree of protection IP 40, for overhead power lines up to 1000 V |
| DIN 48175-2-1978 | Roof poles for lead-in cables, type S, degree of protection IP 54, for overhead power lines up to 1000 V |
| DIN 48207-2-2005 | Overhead lines with nominal voltages exceeding 1 kV - Methods and equipment for the installation of conductors - Part 2: Cable grips |
| DIN 48207-3-2005 | Overhead lines with nominal voltages exceeding 1 kV - Methods and equipment for the installation of conductors - Part 3: Cable couples with spherical joint |
| DIN 48335-1944 | Power current and telecommunication overhead lines; wire rope clamps |
| DIN 54841-3-2000 | Plastic warning devices for buried cables and pipelines - Part 3: Detectable table |
| DIN 54841-5-2000 | Plastic warning devices for underground cables and pipelines - Part 5: Cable cover |
| DIN 65107-1981 | Aerospace; flat-conductor cable, unshielded, 300 V, 150 °C |
| DIN 65108-1981 | Aerospace; flat-conductor cable, unshielded, 300 V, 200 °C |
| DIN 65109-1981 | Aerospace; flat-conductor cable, unshielded, 300 V, 150 °C and 200 °C; technical specification |
| DIN 65359-1990 | Aerospace; shielded electrical cables, copper conductors, insulated shield, one to four conductors, 600 V, 105 °C; technical specification |
| DIN 71990-1982 | Pipes for sheatings of cables for controls |
| DIN 71991-1982 | Threaded end-fittings for cables for controls |
| DIN 71992-1982 | Eye-fittings for cable for controls |
| DIN 72331-1-1979 | Cable connectors for starter batteries; screw terminals for conductor cross sections up to 70 mm<(hoch)2> |
| DIN 72331-2-1979 | Cable connectors for starter batteries; screw terminals for conductor cross sections from 50 to 120 mm<(hoch)2> |
| DIN 72332-2-1983 | Battery cable terminals for starter batteries; light soldering terminals |
| DIN 72333-1-1976 | Tapered battery terminal post connectors for ground braidings |
| DIN 72333-2-1976 | Tapered battery terminal post connectors with ground braidings |
| DIN 72333-3-1976 | Tapered battery terminal post connector; ground braiding, ground strap |
| DIN 72333-4-1976 | Light tapered battery terminal post connectors for ground braidings |
| DIN 72550-1991 | Unscreened high-tension ignition cable assemblies; general requirements and test methods |
| DIN 72551-6-1996 | Road vehicles - Low-tension cables - Part 6: Single-core, unscreened, with thin insulation wall; dimensions, materials, marking |
| DIN 72553-1994 | Battery jumper cable for road vehicles with combustion engines; dimensions, requirements, test |
| DIN 72586-1984 | Motor vehicles; cable connection strips for 24 V nominal voltage installations |
| DIN 72588-2004 | Road vehicles - Open crimp barrels for assembling low-tension cables of thin insulation wall thickness by hand crimping tools |
| DIN 76722-1990 | Road vehicles, low voltage cables; type abbreviation |
| DIN 89158-1998 | Electrical cables for ships and offshore-units - Single and multicore power cables with extruded solid insulation with screen (armour) - Type MGCG, MGCH, halogenfree |
| DIN 89159-1998 | Electrical cables for ships and offshore-units - Cmmunication cables with screen - Type FMGCG, FMGCH, halogenfree |
| DIN 89160-1998 | Electrical cables for ships and offshore-units - Single and multicore power cables with extruded solid insulation without screen - Type MGG, MGH, halogenfree |
| DIN 89266-1993 | Double-pole cable couplings with earthing contact, 10 A d.c., 16 A a.c., 250 V, degree of protection provided by enclosure IP 56 |
| DIN 89280-1-1992 | Glands for cables and cords; assembly |
| DIN 89280-2-1992 | Glands for cables and cords; component parts |
| DIN 89283-1994 | Glands for cables; screw bushes |
| DIN 89345-2006 | Earthing inserts for glands for electrical cables and insulated wires |
| DIN 89347-1992 | Washers for glands for cables and cords |
| DIN 89349-1992 | Gaskets for glands for cables and cords |
| DIN EN 10257-1-1998 | Zinc or zinc alloy coated low carbon steel wire for armouring power and telecommunication cables - Part 1: Land cables; German version EN 10257-1:1998 |
| DIN EN 10257-2-1998 | Zinc or zinc alloy coated low carbon steel wire for armouring power and telecommunication cables - Part 2: Submarine cables; German version EN 10257-2:1998 |
| DIN EN 12548-1999 | Lead and lead alloys - Lead alloy ingots for electric cable sheathing and for sleeves; German version EN 12548:1999 |
| DIN EN 12613-2001 | Plastics warning devices with visual characteristics for underground cables and pipelines; German version EN 12613:2001 |
| DIN EN 13331-1-2002 | Trench lining systems - Part 1: Product specifications; German version EN 13331-1:2002 |
| DIN EN 13331-2-2002 | Trench lining systems - Part 2: Assessment by calculation or test; German version EN 13331-2:2002 |
| DIN EN 13920-3-2003 | Aluminium and aluminium alloys - Scrap - Part 3: Wire and cable scrap; German version EN 13920-3:2003 |
| DIN EN 186150-1997 | Sectional specification: Connector sets for optical fibres and cables - Type OCCA-BU; German version EN 186150:1997 |
| DIN EN 186160-1997 | Sectional specification: Connector sets for optical fibres and cables - Type OCCA-PC; German version EN 186160:1997 |
| DIN EN 186210-1994 | Sectional specification: connector sets for optical fibres and cables; type CF08; German version EN 186210:1992 |
| DIN EN 186260-1998 | Sectional specification: Connector sets for optical fibres and cables - Type SC; German version EN 186260:1997 |
| DIN EN 186290-1998 | Sectional specification: Connector sets for optical fibres and cables - Type MPO; German version EN 186290:1997 |
| DIN EN 186310-2000 | Sectional specification - Connector sets for optical fibres and cables - Type MF; German version EN 186310:1999 |
| DIN EN 187105-2002 | Single mode optical cable (duct/direct buried installation); German version EN 187105:2002 |
| DIN EN 2083-2001 | Aerospace series - Copper or copper alloys conductors for electrical cables - Product standard; German version EN 2083:2001 |
| DIN EN 2266-002-2006 | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 200 °C - Part 002: General; German and English version EN 2266-002:2005 |
| DIN EN 2266-003-2006 | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 200 °C - Part 003: Ink jet printable - Product standard; German and English version EN 2266-003:2005 |
| DIN EN 2266-005-2006 | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 200 °C - Part 005: UV-laser printable - Product standard; German and English version EN 2266-005:2005 |
| DIN EN 2266-007-2006 | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 200 °C - Part 007: UV laser printable multicore jacketed cable - Product standard; German and English version EN 2266-007:2005 |
| DIN EN 2267-002-2006 | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 002: General; German and English version EN 2267-002:2005 |
| DIN EN 2267-003-2006 | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 003: Ink jet printable - Product standard; German and English version EN 2267-003:2005 |
| DIN EN 2267-007-2006 | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 007: DMA family, single ink-jet printable and multicore assembly - Product standard; German and English version EN 2267-007:2005 |
| DIN EN 2267-008-2006 | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 008: DM family, single UV laser printable and muticore assembly - Product standard; German and English version EN 2267-008:2005 |
| DIN EN 2283-1996 | Aerospace series - Testing of aircraft wiring; German version EN 2283:1996 |
| DIN EN 2591-610-2002 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 610: Optical elements; Effectiveness of cable attachment; Cable pulling; German and English version EN 2591-610:2001 |
| DIN EN 2591-611-2002 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 611: Optical elements; Effectiveness of cable attachment; Cable torsion; German and English version EN 2591-611:2001 |
| DIN EN 2591-612-2002 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 612: Optical elements; Effectiveness of cable attachment; Cable axial compression; German and English version EN 2591-612:2002 |
| DIN EN 2591-615-2002 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 615: Optical elements; Connection integrity at temperature; German and English version EN 2591-615:2001 |
| DIN EN 300429-1998 | Digital video broadcasting (DVB) - Framing structure, channel coding and modulation for cable systems; English version EN 300429 V 1.2.1 (1998.04) |
| DIN EN 3475-100-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 100: General; German version EN 3475-100:2002 |
| DIN EN 3475-201-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 201: Visual examination; German version EN 3475-201:2002 |
| DIN EN 3475-202-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 202: Mass; German version EN 3475-202:2002 |
| DIN EN 3475-301-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 301: Electrical resistance per unit length; German version EN 3475-301:2002 |
| DIN EN 3475-302-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 302: Voltage proof test; German version EN 3475-302:2002 |
| DIN EN 3475-303-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 303: Insulation resistance; German version EN 3475-303:2002 |
| DIN EN 3475-304-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 304: Surface resistance; German version EN 3475-304:2002 |
| DIN EN 3475-305-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 305: Overload resistance; German version EN 3475-305:2002 |
| DIN EN 3475-401-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 401: Accelerated ageing; German version EN 3475-401:2002 |
| DIN EN 3475-402-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 402: Shrinkage and delamination; German version EN 3475-402:2002 |
| DIN EN 3475-403-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 403: Delamination and blocking; German version EN 3475-403:2002 |
| DIN EN 3475-404-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 404: Thermal shock; German version EN 3475-404:2002 |
| DIN EN 3475-405-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 405: Bending at ambient temperature; German version EN 3475-405:2002 |
| DIN EN 3475-406-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 406: Cold bend test; German version EN 3475-406:2002 |
| DIN EN 3475-409-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 409: Air-excluded ageing; German version EN 3475-409:2002 |
| DIN EN 3475-410-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 410: Thermal endurance; German version EN 3475-410:2002 |
| DIN EN 3475-412-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 412: Humidity resistance; German and English version EN 3475-412:2002 |
| DIN EN 3475-413-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 413: Wrap back test; German and English version EN 3475-413:2002 |
| DIN EN 3475-501-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 501: Dynamic cut-through; German version EN 3475-501:2002 |
| DIN EN 3475-502-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 502: Notch propagation; German version EN 3475-502:2002 |
| DIN EN 3475-503-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 503: Scrape abrasion; German version EN 3475-503:2002 |
| DIN EN 3475-504-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 504: Torsion; German version EN 3475-504:2002 |
| DIN EN 3475-505-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 505: Tensile test on conductors and strands; German version EN 3475-505:2002 |
| DIN EN 3475-506-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 506: Plating continuits; German version EN 3475-506:2002 |
| DIN EN 3475-507-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 507: Adherence of plating; German version EN 3475-507:2002 |
| DIN EN 3475-508-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 508: Plating thickness; German and English version EN 3475-508:2002 |
| DIN EN 3475-509-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 509: Solderability; German and English version EN 3475-509:2002 |
| DIN EN 3475-510-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 510: Tensile strength and elongation of extruded insulation, sheath and jacket material; German and English version EN 3475-510:2002 |
| DIN EN 3475-511-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 511: Cable-to-cable abrasion; German and English version EN 3475-511:2002 |
| DIN EN 3475-512-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 512: Flexure endurance; German and English version EN 3475-512:2002 |
| DIN EN 3475-603-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 603: Resistance to wet arc tracking; German and English version EN 3475-603:2002 |
| DIN EN 3475-604-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 604: Resistance to dry arc propagation; German and English version EN 3475-604:2002 |
| DIN EN 3475-605-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 605: Wet short circuit test; German and English version EN 3475-605:2002 |
| DIN EN 3475-701-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 701: Strippabilitiy and adherence of insulation to the conductor; German version EN 3475-701:2002 |
| DIN EN 3475-702-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 702: Screen pushback capability; German version EN 3475-702:2002 |
| DIN EN 3475-703-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 703: Permanence of manufacturer's marking; German version EN 3475-703:2002 |
| DIN EN 3475-704-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 704: Flexibility; German and English version EN 3475-704:2002 |
| DIN EN 3475-801-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 801: Capacitance per unit length; German and English version EN 3475-801:2002 |
| DIN EN 3475-802-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 802: Capacitance unbalance; German and English version EN 3475-802:2002 |
| DIN EN 3475-803-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 803: Capacitance variation; German and English version EN 3475-803:2002 |
| DIN EN 3475-804-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 804: Velocity of propagation; German and English version EN 3475-804:2002 |
| DIN EN 3475-805-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 805: Characteristic impedance; German and English version EN 3475-805:2002 |
| DIN EN 3475-806-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 806: Attenuation; German and English version EN 3475-806:2002 |
| DIN EN 3475-807-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 807: Transfer impedance; German and English version EN 3475-807:2002 |
| DIN EN 3475-808-2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 808: Cross-talk; German and English version EN 3475-808:2002 |
| DIN EN 3745-201-2003 | Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 201: Visual examination; German and English version EN 3745-201:2002 |
| DIN EN 3745-205-2003 | Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 205: Cable longitudinal dimensional stability; German and English version EN 3745-205:2002 |
| DIN EN 3745-301-2003 | Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 301: Attenuation; German and English version EN 3745-301:2002 |
| DIN EN 3745-302-2003 | Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 302: Numerical aperture; German and English version EN 3745-302:2002 |
| DIN EN 3745-305-2003 | Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 305: Immunity to ambient light coupling; German and English version EN 3745-305:2002 |
| DIN EN 3745-504-2003 | Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 504: Micro bending test; German and English version EN 3745-504:2002 |
| DIN EN 3745-507-2003 | Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 507: Cut-through; German and English version EN 3745-507:2002 |
| DIN EN 3745-508-2003 | Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 508: Torsion; German and English version EN 3745-508:2002 |
| DIN EN 3745-509-2003 | Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 509: Kink test; German and English version EN 3745-509:2002 |
| DIN EN 3745-510-2003 | Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 510: Bending test; German and English version EN 3745-510:2002 |
| DIN EN 3745-511-2002 | Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 511: Cable to cable abrasion; German and English version EN 3745-511:2002 |
| DIN EN 45510-2-8-2005 | Guide for procurement of power station equipment - Part 2-8: Electrical equipment - Power cables; German version EN 45510-2-8:2004 |
| DIN EN 50083 Bb.1-2002 | Cable networks for television signals, sound signals and interactive services - Guide for the equipotential bonding in meshed systems |
| DIN EN 50083-10-2002 | Cable networks for television signals, sound signals and interactive services - Part 10: System performance for return paths; German version EN 50083-10:2002 |
| DIN EN 50083-2-2006 | Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment; German version EN 50083-2:2001 + A1:2005 |
| DIN EN 50083-3 Berichtigung 1-2006 | Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for coaxial cable networks; German version EN 50083-3:2002, Corrigenda to DIN EN 50083-3 (VDE 0855-3):2002-10; CENELEC-Corrigendum April 2006 to EN 50083-3:2002 |
| DIN EN 50083-3-2002 | Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for coaxial cable networks; German version EN 50083-3:2002 |
| DIN EN 50083-4-1999 | Cable networks for television signals, sound signals and interactive service - Part 4: Passive wideband equipment for coaxial cable networks; German version EN 50083-4:1998 |
| DIN EN 50083-5-2001 | Cabled networks for television signals, sound signals and interactive services - Part 5: Headend equipment; German version EN 50083-5:2001 |
| DIN EN 50083-7 Berichtigung 1-2006 | Cable networks for television signals, sound signals and interactive services - Part 7: System performance; German version EN 50083-7:1996 + Corrigendum:2000 + A1:2000, Corrigenda to DIN EN 50083-7 (VDE 0855-7):2001-04 |
| DIN EN 50083-8-2002 | Cable networks for television signals, sound signals and interactive services - Part 8: Electromagnetic compatibility for networks; German version EN 50083-8:2002 |
| DIN EN 50083-9-2003 | Cable networks for television signals, sound signals and interactive services - Part 9: Interfaces for CATV/SMATV headends and similar professional equipment for DVB/MPEG-2 transport streams; German version EN 50083-9:2002 |
| DIN EN 50085-1-2006 | Cable trunking systems and cable ducting systems for electrical installations - Part 1: General requirements; German version EN 50085-1:2005 |
| DIN EN 50085-2-3-1999 | Cable trunking systems and cable ducting systems for electrical installations - Part 2-3: Particular requirements for slotted cable trunking systems intended for installation in cabinets; German version EN 50085-2-3:1999 |
| DIN EN 50086-2-4-2001 | Conduit systems for cable management - Part 2-4: Particular requirements for conduit systems buried underground; German version EN 50086-2-4:1994 + A1:2001 + Corr. 2001 |
| DIN EN 50090-9-1-2004 | Home and Building Electronic Systems (HBES) - Part 9-1: Installation requirements - Generic cabling for HBES Class 1 Twisted Pair; German version EN 50090-9-1:2004 |
| DIN EN 50098-1-2003 | Customer premises cabling for information technology - Part 1: ISDN basic access; German version EN 50098-1:1998 + A1:2002 + Corrigendum January 2003 |
| DIN EN 50098-2-1996 | Customer premises cabling for information technology - Part 2: 2048 kbit/s ISDN primary access and leased line network interface; German version EN 50098-2:1996 |
| DIN EN 50109-1-1995 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 1: General requirements and tests; German version EN 50109-1:1995 |
| DIN EN 50109-2-1-1995 | Hand crimping tools - Tools for the crimp termination of electrical cables and wires for low frequency and radio frequency applications - Part 2-1: Particular requirements for radio frequency connectors and concentric contacts; open throat tools with fixed dies, sizes A to E, V and W; German version EN 50109-2-1:1995 |
| DIN EN 50109-2-2-1995 | Hand crimping tools - Tools for the crimp termination of electrical cables and wires for low frequency and radio frequency applications - Part 2-2: Particular requirements for radio frequency connectors and concentric contacts; open throat tools with removable and interchangeable dies, sizes A to G, Q bis T, V and W; German version EN 50109-2-2:1995 |
| DIN EN 50109-2-3-1995 | Hand crimping tools - Tools for the crimp termination of electrical cables and wires for low frequency and radio frequency applications - Part 2-3: Particular requirements for contacts of electrical connectors; German version EN 50109-2-3:1995 |
| DIN EN 50109-2-4-1995 | Hand crimping tools - Tools for the crimp termination of electrical cables and wires for low frequency and radio frequency applications - Part 2-4: Particular requirements for centre contacts of RF connectors, series SMZ; German version EN 50109-2-4:1995 |
| DIN EN 50109-2-5-1995 | Hand crimping tools - Tools for the crimp termination of electrical cables and wires for low frequency and radio frequency applications - Part 2-5: Particular requirements for the termination of twin-ax cable for databus applications; German version EN 50109-2-5:1995 |
| DIN EN 50117-1-2003 | Coaxial cables - Part 1: Generic specification; German version EN 50117-1:2002 |
| DIN EN 50117-2-1-2006 | Coaxial cables - Part 2-1: Sectional specification for cables used in cabled distribution networks - Indoor drop cables for systems operating at 5 MHz - 1000 MHz; German version EN 50117-2-1:2005 |
| DIN EN 50117-2-2-2005 | Coaxial cables - Part 2-2: Sectional specification for cables used in cabled distribution networks - Outdoor drop cables for systems operating at 5 MHz - 1000 MHz; German version EN 50117-2-2:2004 |
| DIN EN 50117-2-3-2005 | Coaxial cables - Part 2-3: Sectional specification for cables used in cabled distribution networks - Distribution and trunk cables for systems operating at 5 MHz - 1000 MHz; German version EN 50117-2-3:2004 |
| DIN EN 50117-2-4-2005 | Coaxial cables - Part 2-4: Sectional specification for cables used in cabled distribution networks - Indoor drop cables for systems operating at 5 MHz - 3000 MHz; German version EN 50117-2-4:2004 |
| DIN EN 50117-2-5-2005 | Coaxial cables - Part 2-5: Sectional specification for cables used in cabled distribution networks - Outdoor drop cables for systems operating at 5 MHz - 3000 MHz; German version EN 50117-2-5:2004 |
| DIN EN 50117-3-1-2003 | Coaxial cables - Part 3-1: Sectional specifications for cables used in Telecom applications; Miniaturized cables used in digital communications systems; German version EN 50117-3-1:2002 |
| DIN EN 50117-3-1996 | Coaxial cables used in cabled distribution networks - Part 3: Sectional specification for outdoor drop cables; German version EN 50117-3:1996 |
| DIN EN 50117-4-1996 | Coaxial cables used in cabled distribution networks - Part 4: Sectional specification for distribution and trunk cables; German version EN 50117-4:1996 |
| DIN EN 50117-5-1998 | Coaxial cables used in cabled distribution networks - Part 5: Sectional specification for indoor drop cables for use in networks operating at frequencies between 5 MHz and 2150 MHz; German version EN 50117-5:1997 |
| DIN EN 50117-6-1998 | Coaxial cables used in cabled distribution networks - Part 6: Sectional specification for outdoor drop cables for use in networks operating at frequencies between 5 MHz and 2150 MHz; German version EN 50117-6:1997 |
| DIN EN 50143-2004 | Cables for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV; German version EN 50143:1997 + A1:2003 |
| DIN EN 50146-2000 | Cable ties for electrical installations; German version EN 50146:2000 |
| DIN EN 50173-1-2003 | Information technology - Generic cabling systems - Part 1: General requirements and office areas; German version EN 50173-1:2002 + Corrigendum January 2003 |
| DIN EN 50174-1-2001 | Information technology - Cabling installation - Part 1: Specification and quality assurance; German version EN 50174-1:2000 |
| DIN EN 50174-2-2001 | Information technology - Cabling installation - Part 2: Installation planning and practices inside buildings; German version EN 50174-2:2000 |
| DIN EN 50174-3-2004 | Information technology - Cabling installation - Part 3: Installation planning and practices outside buildings; German version EN 50174-3:2003 |
| DIN EN 50200-2000 | Method of test for resistance to fire of unprotected small cables for use in emergency circuits; German version EN 50200:2000 |
| DIN EN 50214-1998 | Flexible cables for lifts; German version EN 50214:1997 |
| DIN EN 50249-2003 | Electromagnetic locators for buried pipes and cables - Performance and safety; German version EN 50249:2002 |
| DIN EN 50262-2005 | Cable glands for electrical installations; German version EN 50262:1998 + A1:2001 + A2:2004 |
| DIN EN 50264-1-2003 | Railway applications - Railway rolling stock cables having special fire performance; Standard wall - Part 1: General requirements; German version EN 50264-1:2002 |
| DIN EN 50264-2-2003 | Railway applications - Railway rolling stock cables having special fire performance; Standard wall - Part 2: Single core cables; German version EN 50264-2:2002 |
| DIN EN 50264-3-2003 | Railway applications - Railway rolling stock cables having special fire performance; Standard wall - Part 3: Multicore cables; German version EN 50264-3:2002 |
| DIN EN 50266-1-2001 | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 1: Apparatus; German version EN 50266-1:2001 |
| DIN EN 50266-2-1-2001 | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-1: Procedures; Category A F/R; German version EN 50266-2-1:2001 |
| DIN EN 50266-2-2-2001 | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-2: Procedures; Category A; German version EN 50266-2-2:2001 |
| DIN EN 50266-2-3-2001 | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-3: Procedures; Category B; German version EN 50266-2-3:2001 |
| DIN EN 50266-2-4-2001 | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-4: Procedures; Category C; German version EN 50266-2-4:2001 |
| DIN EN 50266-2-5-2001 | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-5: Procedures; Small cables; Category D; German version EN 50266-2-5:2001 |
| DIN EN 50267-1-1999 | Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 1: Apparatus; German version EN 50267-1:1998 |
| DIN EN 50267-2-1-1999 | Common test methods for cables under fire conditions - Tests on gases evolved during combustion of material from cables - Part 2-1: Procedures; determination of the amount of halogen acid gas; German version EN 50267-2-1:1998 |
| DIN EN 50267-2-2-1999 | Common test methods for cables under fire conditions - Tests on gases evolved during combustion of material from cables - Part 2-2: Procedures; determination of degree of acidity of gases for materials by measuring pH and conductivity; German version EN 50267-2-2:1998 |
| DIN EN 50267-2-3-1999 | Common test methods for cables under fire conditions - Tests on gases evolved during combustion of material from cables - Part 2-3: Procedures; determination of degree of acidity of gases for cables by determination of the weighted average of pH and conductivity; German version EN 50267-2-3:1998 |
| DIN EN 50288-1-2004 | Multi-element metallic cables used in analogue and digital communication and control - Part 1: Generic specification; German version EN 50288-1:2003 |
| DIN EN 50288-2-1-2004 | Multi-element metallic cables used in analogue and digital communication and control - Part 2-1: Sectional specification for screened cables characterised up to 100 MHz - Horizontal and building backbone cables; German version EN 50288-2-1:2003 |
| DIN EN 50288-2-2-2004 | Multi-element metallic cables used in analogue and digital communication and control - Part 2-2: Sectional specification for screened cables characterised up to 100 MHz - Work area and patch cord cables; German version EN 50288-2-2:2003 |
| DIN EN 50288-3-1-2004 | Multi-element metallic cables used in analogue and digital communication and control - Part 3-1: Sectional specification for unscreened cables characterised up to 100 MHz - Horizontal and building backbone cables; German version EN 50288-3-1:2003 |
| DIN EN 50288-3-2-2004 | Multi-element metallic cables used in analogue and digital communication and control - Part 3-2: Sectional specification for unscreened cables characterised up to 100 MHz - Work area and patch cord cables; German version EN 50288-3-2:2003 |
| DIN EN 50288-4-1-2004 | Multi-element metallic cables used in analogue and digital communication and control - Part 4-1: Sectional specification for screened cables characterised up to 600 MHz - Horizontal and building backbone cables; German version EN 50288-4-1:2003 |
| DIN EN 50288-4-2-2004 | Multi-element metallic cables used in analogue and digital communication and control - Part 4-2: Sectional specification for screened cables characterised up to 600 MHz - Work area and patch cord cables; German version EN 50288-4-2:2003 |
| DIN EN 50288-5-1-2004 | Multi-element metallic cables used in analogue and digital communication and control - Part 5-1: Sectional specification for screened cables characterized up to 250 MHz - Horizontal and building backbone cables; German version EN 50288-5-1:2003 |
| DIN EN 50288-5-2-2004 | Multi-element metallic cables used in analogue and digital communication and control - Part 5-2: Sectional specification for screened cables characterized up to 250 MHz - Work area and patch cord cables; German version EN 50288-5-2:2003 |
| DIN EN 50288-6-1-2004 | Multi-element metallic cables used in analogue and digital communication and control - Part 6-1: Sectional specification for unscreened cables characterised up to 250 MHz - Horizontal and building backbone cables; German version EN 50288-6-1:2003 |
| DIN EN 50288-6-2-2004 | Multi-element metallic cables used in analogue and digital communication and control - Part 6-2: Sectional specification for unscreened cables characterised up to 250 MHz - Work area and patch cord cables; German version EN 50288-6-2:2003 |
| DIN EN 50288-7-2006 | Multi-element metallic cables used in analogue and digital communication and control - Part 7: Sectional specification for instrumentation and control cables; German version EN 50288-7:2005 |
| DIN EN 50289-1-1-2002 | Communication cables - Specifications for test methods - Part 1-1: Electrical test methods; General requirements; German version EN 50289-1-1:2001 |
| DIN EN 50289-1-10-2002 | Communication cables - Specifications for test methods - Part 1-10: Electrical test methods; Crosstalk; German version EN 50289-1-10:2001 |
| DIN EN 50289-1-11-2002 | Communication cables - Specifications for test methods - Part 1-11: Electrical test methods; Characteristic impedance, input impedance, return loss; German version EN 50289-1-11:2001 |
| DIN EN 50289-1-12-2005 | Communication cables - Specifications for test methods - Part 1-12: Electrical test methods - Inductance; German version EN 50289-1-12:2005 |
| DIN EN 50289-1-13-2004 | Communication cables - Specifications for test methods - Part 1-13: Electrical test methods - Coupling attenuation or screening attenuation of patch cords / coaxial cable assemblies / pre-connectorised cables; German version EN 50289-1-13:2004 |
| DIN EN 50289-1-14-2004 | Communication cables - Specifications for test methods - Part 1-14: Electrical test methods - Coupling attenuation or screening attenuation of connecting hardware; German version EN 50289-1-14:2004 |
| DIN EN 50289-1-15-2005 | Communication cables - Specifications for test methods - Part 1-15: Electromagnetic performance - Coupling attenuation of links and channels (Laboratory conditions); German version EN 50289-1-15:2004 |
| DIN EN 50289-1-2-2002 | Communication cables - Specifications for test methods - Part 1-2: Electrical test methods; DC resistance; German version EN 50289-1-2:2001 |
| DIN EN 50289-1-3-2002 | Communication cables - Specifications for test methods - Part 1-3: Electrical test methods; Dielectric strength; German version EN 50289-1-3:2001 |
| DIN EN 50289-1-4-2002 | Communication cables - Specifications for test methods - Part 1-4: Electrical test methods; Insulation resistance; German version EN 50289-1-4:2001 |
| DIN EN 50289-1-5-2002 | Communication cables - Specifications for test methods - Part 1-5: Electrical test methods; Capacitance; German version EN 50289-1-5:2001 |
| DIN EN 50289-1-6-2002 | Communication cables - Specifications for test methods - Part 1-6: Electrical test methods; Electromagnetic performance; German version EN 50289-1-6:2002 |
| DIN EN 50289-1-7-2002 | Communication cables - Specifications for test methods - Part 1-7: Electrical test methods; Velocity of propagation; German version EN 50289-1-7:2001 |
| DIN EN 50289-1-8-2002 | Communication cables - Specifications for test methods - Part 1-8: Electrical test methods; Attenuation; German version EN 50289-1-8:2001 |
| DIN EN 50289-1-9-2002 | Communication cables - Specifications for test methods - Part 1-9: Electrical test methods - Unbalance attenuation (longitudinal conversion loss, longitudinal conversion transfer loss); German version EN 50289-1-9:2001 |
| DIN EN 50289-3-1-2002 | Communication cables - Specifications for test methods - Part 3-1: Mechanical test methods; General requirements; German version EN 50289-3-1:2001 |
| DIN EN 50289-3-10-2005 | Communication cables - Specifications for tests methods - Part 3-10: Mechanical test methods - Torsion and twisting; German version EN 50289-3-10:2004 |
| DIN EN 50289-3-11-2002 | Communication cables - Specifications for test methods - Part 3-11: Mechanical test methods; Cable cut-through resistance; German version EN 50289-3-11:2001 |
| DIN EN 50289-3-12-2002 | Communication cables - Specifications for test methods - Part 3-12: Mechanical test methods; Shot gun damage; German version EN 50289-3-12:2001 |
| DIN EN 50289-3-13-2004 | Communication cables - Specifications for test methods - Part 3-13: Mechanical test methods - Aeolian vibration; German version EN 50289-3-13:2003 |
| DIN EN 50289-3-15-2004 | Communication cables - Specifications for test methods - Part 3-15: Mechanical test methods - Underwater cable resistance to hydrostatic pressure; German version EN 50289-3-15:2003 |
| DIN EN 50289-3-16-2002 | Communication cables - Specifications for test methods - Part 3-16: Mechanical test methods; Cable tensile performance; German version EN 50289-3-16:2001 |
| DIN EN 50289-3-17-2002 | Communication cables - Specifications for test methods - Part 3-17: Mechanical test methods; Adhesion of dielectric and sheath; German version EN 50289-3-17:2002 |
| DIN EN 50289-3-2-2002 | Communication cables - Specifications for test methods - Part 3-2: Mechanical test methods; Tensile strength and elongation for conductor; German version EN 50289-3-2:2001 |
| DIN EN 50289-3-4-2002 | Communication cables - Specifications for test methods - Part 3-4: Mechanical test methods; Shrinkage of insulation; German version EN 50289-3-4:2001 |
| DIN EN 50289-3-5-2002 | Communication cables - Specifications for test methods - Part 3-5: Mechanical test methods; Crush resistance of the cable; German version EN 50289-3-5:2001 |
| DIN EN 50289-3-6-2002 | Communication cables - Specifications for test methods - Part 3-6: Mechanical test methods; Impact resistance of the cable; German version EN 50289-3-6:2001 |
| DIN EN 50289-3-7-2002 | Communication cables - Specifications for test methods - Part 3-7: Mechanical test methods; Abrasion resistance of the cable sheath; German version EN 50289-3-7:2001 |
| DIN EN 50289-3-8-2002 | Communication cables - Specifications for test methods - Part 3-8: Mechanical test methods; Abrasion resistance of cable sheath markings; German version EN 50289-3-8:2001 |
| DIN EN 50289-3-9-2002 | Communication cables - Specifications for test methods - Part 3-9: Mechanical test methods; Bending tests; German version EN 50289-3-9:2001 |
| DIN EN 50289-4-1-2002 | Communication cables - Specifications for test methods - Part 4-1: Environmental test methods; General requirements; German version EN 50289-4-1:2001 |
| DIN EN 50289-4-11-2002 | Communication cables - Specifications for test methods - Part 4-11: Environmental test methods; A horizontal integrated fire test method; German version EN 50289-4-11:2002 |
| DIN EN 50289-4-12-2005 | Communication cables - Specifications for test methods - Part 4-12: Environmental test methods - Vertical flame spread test on bunched small communication cables; German version EN 50289-4-12:2004 |
| DIN EN 50289-4-14-2004 | Communication cables - Specifications for test methods - Part 4-14: Environmental test methods - Lightning; German version EN 50289-4-14:2003 |
| DIN EN 50289-4-2-2002 | Communication cables - Specifications for test methods - Part 4-2: Environmental test methods; Water penetration; German version EN 50289-4-2:2001 |
| DIN EN 50289-4-6-2002 | Communication cables - Specifications for test methods - Part 4-6: Environmental test methods; Temperature cycling; German version EN 50289-4-6:2001 |
| DIN EN 50289-4-9-2002 | Communication cables - Specifications for test methods - Part 4-9: Environmental test methods; Pneumatic resistance; German version EN 50289-4-9:2001 |
| DIN EN 50290-1-1-2002 | Communication cables - Part 1-1: General; German version EN 50290-1-1:2001 |
| DIN EN 50290-1-2-2005 | Communication cables - Part 1-2: Definitions; Trilingual version EN 50290-1-2:2004 |
| DIN EN 50290-2-1-2005 | Communication cables - Part 2-1: Common design rules and construction; German version EN 50290-2-1:2005 |
| DIN EN 50290-2-20-2002 | Communication cables - Part 2-20: Common design rules and construction; General; German version EN 50290-2-20:2001 |
| DIN EN 50290-2-21-2002 | Communication cables - Part 2-21: Common design rules and construction; PVC insulation compounds; German version EN 50290-2-21:2001 |
| DIN EN 50290-2-22-2002 | Communication cables - Part 2-22: Common design rules and construction; PVC sheathing compounds; German version EN 50290-2-22:2001 |
| DIN EN 50290-2-23-2002 | Communication cables - Part 2-23: Common design rules and construction; PE insulation; German version EN 50290-2-23:2001 |
| DIN EN 50290-2-24-2002 | Communication cables - Part 2-24: Common design rules and construction; PE sheathing; German version EN 50290-2-24:2002 |
| DIN EN 50290-2-25-2002 | Communication cables - Part 2-25: Common design rules and construction; Polypropylene insulation compounds; German version EN 50290-2-25:2002 |
| DIN EN 50290-2-26-2002 | Communication cables - Part 2-26: Common design rules and construction; Halogen free flame retardant insulation compounds; German version EN 50290-2-26:2002 |
| DIN EN 50290-2-27-2002 | Communication cables - Part 2-27: Common design rules and construction; Halogen free flame retardant thermoplastic sheathing compounds; German version EN 50290-2-27:2002 |
| DIN EN 50290-2-28-2002 | Communication cables - Part 2-28: Common design rules and construction; Filling compounds for filled cables; German version EN 50290-2-28:2002 |
| DIN EN 50290-2-29-2002 | Communication cables - Part 2-29: Common design rules and construction; Cross-linked PE insulation compounds; German version EN 50290-2-29:2002 |
| DIN EN 50290-2-30-2002 | Communication cables - Part 2-30: Common design rules and construction; Poly(tetrafluoroethylene-hexafluoropropylene) (FEP) insulation and sheathing; German version EN 50290-2-30:2002 |
| DIN EN 50290-4-1-2002 | Communication cables - Part 4-1: General considerations for the use of cables; Environmental conditions and safety aspects; German version EN 50290-4-1:2001 |
| DIN EN 50299 Berichtigung 1-2005 | Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment U<(Index)m> from 72,5 kV to 550 kV; German version EN 50299:2002, Corrigenda to DIN EN 50299:2003-10 |
| DIN EN 50299-2003 | Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment U<(Index)m> from 72,5 kV to 550 kV; German version EN 50299:2002 |
| DIN EN 50300-2005 | Low-voltage switchgear and controlgear assemblies - General requirements for low-voltage substation cable distribution boards; German version EN 50300:2004 |
| DIN EN 50305-2003 | Railway applications - Railway rolling stock cables having special fire performance - Test methods; German version EN 50305:2002 |
| DIN EN 50306-1-2003 | Railway applications - Railway rolling stock cables having special fire performance; Thin wall - Part 1: General requirements; German version EN 50306-1:2002 |
| DIN EN 50306-2-2003 | Railway applications - Railway rolling stock cables having special fire performance; Thin wall - Part 2: Single core cables; German version EN 50306-2:2002 |
| DIN EN 50306-3-2003 | Railway applications - Railway rolling stock cables having special fire performance; Thin wall - Part 3: Single core and multicore cables (pairs, triples and quads) screened and thin wall sheathed; German version EN 50306-3:2002 |
| DIN EN 50306-4-2003 | Railway applications - Railway rolling stock cables having special fire performance; Thin wall - Part 4: Multicore and multipair cables standard wall sheathed; German version EN 50306-4:2002 |
| DIN EN 50307-2003 | Lead and lead alloys - Lead and lead alloy sheaths and sleeves of electric cables; German version EN 50307:2002 |
| DIN EN 50334-2001 | Marking by inscription for the identification of cores of electric cables; German version EN 50334:2001 |
| DIN EN 50336-2002 | Bushings for transformer and reactor cable boxes not exceeding 36 kV; German version EN 50336:2002 |
| DIN EN 50340-2002 | Hydraulic cable cutting devices - Devices to be used on electrical installations with nominal voltage up to AC 30 kV; German version EN 50340:2001 |
| DIN EN 50343-2003 | Railway applications - Rolling stock - Rules for installation of cabling; German version EN 50343:2003 |
| DIN EN 50346-2003 | Information Technology - Cabling installation - Testing of installed cabling; German version EN 50346:2002 |
| DIN EN 50355-2004 | Railway applications - Railway rolling stock cables having special fire performance - Thin wall and standard wall - Guide to use; German version EN 50355:2003 |
| DIN EN 50356-2003 | Method for spark testing of cables; German version EN 50356:2002 |
| DIN EN 50362-2003 | Method of test for resistance to fire of larger unprotected power and control cables for use in emergency circuits; German version EN 50362:2003 |
| DIN EN 50368-2004 | Cable cleats for electrical installations; German version EN 50368:2003 |
| DIN EN 50369-2006 | Liquid tight sheathing systems for cable management; German version EN 50369:2005 |
| DIN EN 50406-1-2005 | End user multi-pair cables used in high bit rate telecommunication networks - Part 1: Aerial cables; German version EN 50406-1:2004 |
| DIN EN 50406-2-2005 | End user multi-pair cables used in high bit rate telecommunication networks - Part 2: Duct and buried cables; German version EN 50406-2:2004 |
| DIN EN 50407-1-2005 | Multi-pair cables used in high bit rate digital access telecommunication networks - Part 1: Outdoor cables; German version EN 50407-1:2004 |
| DIN EN 60169-23-1994 | Radio-frequency connectors; part 23: pin and socket connector for use with 3,5 mm rigid precision coaxial lines with inner diameter of outer conductor 3,5 mm (IEC 60169-23:1991); German version EN 60169-23:1993 |
| DIN EN 60169-24-1994 | Radio-frequency connectors; part 24: radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (type F) (IEC 60169-24:1991); German version EN 60169-24:1993 |
| DIN EN 60169-25-1994 | Radio-frequency connectors; part 25: two-pole screw (3/4-20 UNEF) coupled connectors for use with shielded balanced cables having twin inner conductors with inner diameter of outer conductor 13,56 mm (type TWHN) (IEC 60169-25:1992); German version EN 60169-25:1993 |
| DIN EN 60228-2005 | Conductors of insulated cables (IEC 60228:2004); German version EN 60228:2005 + Corrigendum:2005 |
| DIN EN 60230-2003 | Impulse tests on cables and their accessories (IEC 60230:1966); German version EN 60230:2002 |
| DIN EN 60332-1-1-2005 | Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus (IEC 60332-1-1:2004); German version EN 60332-1-1:2004 |
| DIN EN 60332-1-2-2005 | Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame (IEC 60332-1-2:2004); German version EN 60332-1-2:2004 |
| DIN EN 60332-1-3-2005 | Tests on electric and optical fibre cables under fire conditions - Part 1-3: Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/particles (IEC 60332-1-3:2004); German version EN 60332-1-3:2004 |
| DIN EN 60332-2-1-2005 | Tests on electric and optical fibre cables under fire conditions - Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable - Apparatus (IEC 60332-2-1:2004); German version EN 60332-2-1:2004 |
| DIN EN 60332-2-2-2005 | Tests on electric and optical fibre cables under fire conditions - Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame (IEC 60332-2-2:2004); German version EN 60332-2-2:2004 |
| DIN EN 60371-3-8-1997 | Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 8: Mica paper tapes for flame-resistant security cables (IEC 60371-3-8:1995 + Corrigendum 1995); German version EN 60371-3-8:1995 |
| DIN EN 60439-5-1997 | Low-voltage switchgear and controlgear assemblies - Part 5: Particular requirements for assemblies intended to be installed outdoors in public places; cable distribution cabinets (CDCs) for power distribution networks (IEC 60439-5:1996); German version EN 60439-5:1996 |
| DIN EN 60439-5/A1-1999 | Low-voltage switchgear and controlgear assemblies - Part 5: Particular requirements for assemblies intended to be installed outdoors in public places; cable distribution cabinets (CDCs) for power distribution in networks; Amendment A1 (IEC 60439-5:1996/A1:1998); German version EN 60439-5:1996/A1:1998 |
| DIN EN 60465-1994 | Specification for unused insulating mineral oils for cables with oil ducts (IEC 60465:1988); German version EN 60465:1990 |
| DIN EN 60526-2006 | High-voltage cable plug and socket connections for medical X-ray equipment (IEC 60526:1978, modified); German version EN 60526:2004 |
| DIN EN 60603-9-1998 | Connectors for frequencies below 3 MHz for use with printed boards - Part 9: Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in) (IEC 60603-9:1990); German version EN 60603-9:1998 |
| DIN EN 60702-1-2002 | Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 1: Cables (IEC 60702-1:2002); German version EN 60702-1:2002 |
| DIN EN 60702-2-2002 | Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 2: Terminations (IEC 60702-2:2002); German version EN 60702-2:2002 |
| DIN EN 60708-2006 | Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath (IEC 60708:2005); German version EN 60708:2005 |
| DIN EN 60719-1994 | Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V (IEC 60719:1992); German version EN 60719:1993 |
| DIN EN 60728-11-2005 | Cable networks for television signals, sound signals and interactive services - Part 11: Safety (IEC 60728-11:2005); German version EN 60728-11:2005 |
| DIN EN 60728-6-2004 | Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment (IEC 60728-6:2003); German version EN 60728-6:2003 |
| DIN EN 60728-7-1-2005 | Cable networks for television signals, sound signals and interactive services - Part 7-1: Hybrid fibre coax outside plant status monitoring - Physical (PHY) layer specification (IEC 60728-7-1:2003); German version EN 60728-7-1:2005, text in English |
| DIN EN 60728-7-2-2005 | Cable networks for television signals, sound signals and interactive services - Part 7-2: Hybrid fibre coax outside plant status monitoring - Media Access Control (MAC) layer specification (IEC 60728-7-2:2003); German version EN 60728-7-2:2005, text in English |
| DIN EN 60728-7-3-2005 | Cable networks for television signals, sound signals and interactive services - Part 7-3: Hybrid fibre coax outside plant status monitoring - Power Supply to Transponder Interface Bus (PSTIB) specification (IEC 60728-7-3:2003); German version EN 60728-7-3:2005, text in English |
| DIN EN 60794-1-1-2002 | Optical fibre cable - Part 1-1: Generic specification; General (IEC 60794-1-1:2001); German version EN 60794-1-1:2002 |
| DIN EN 60794-2-10-2003 | Optical fibre cables - Part 2-10: Indoor cables - Family specification for simplex and duplex cables (IEC 60794-2-10:2003); German version EN 60794-2-10:2003 |
| DIN EN 60794-2-20-2003 | Optical fibre cables - Part 2-20: Indoor cables; Family specification for multi-fibre optical distribution cables (IEC 60794-2-20:2003); German version EN 60794-2-20:2003 |
| DIN EN 60794-2-21-2006 | Optical fibre cables - Part 2-21: Indoor cables - Detailed specification for multi-fibre optical distribution cables for use in premises cabling (IEC 60794-2-21:2005); German version EN 60794-2-21:2006 |
| DIN EN 60794-2-30-2003 | Optical fibre cables - Part 2-30: Indoor cables; Family specification for optical fibre ribbon cables (IEC 60794-2-30:2003); German version EN 60794-2-30:2003 |
| DIN EN 60794-2-31-2006 | Optical fibre cables - Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premises cabling (IEC 60794-2-31:2005); German version EN 60794-2-31:2006 |
| DIN EN 60794-3-10-2003 | Optical fibre cables - Part 3-10: Outdoor cables; Family specification for duct and directly buried optical telecommunication cables (IEC 60794-3-10:2002, modified); German version EN 60794-3-10:2002 |
| DIN EN 60794-3-20-2003 | Optical fibre cables - Part 3-20: Outdoor cables - Family specification for optical self-supporting aerial telecommunication cables (IEC 60794-3-20:2002, modified); German version EN 60794-3-20:2002 |
| DIN EN 60794-3-2002 | Optical fibres cables - Part 3: Sectional specification; Outdoor cables (IEC 60794-3:2001); German version EN 60794-3:2002 |
| DIN EN 60811-1-1-2002 | Insulating and sheathing materials of electric cables - Common test methods - Part 1-1: General application; Measurement of thickness and overall dimensions; Test for determining the mechanical properties (IEC 60811-1-1:1993 + A1:2001); German version EN 60811-1-1:1995 + A1:2001 |
| DIN EN 60811-1-2-2001 | Insulating and sheathing materials of electric cables - Common test methods - Part 1: General application; Section 2: Thermal ageing methods (IEC 60811-1-2:1985 + Corrigendum May 1986 + A1:1989 + A2:2000); German version EN 60811-1-2:1995 + A2:2000 |
| DIN EN 60811-1-3-2002 | Insulating and sheathing materials of electric and optical cables - Common test methods - Part 1-3: General application; Methods for determining the density; Water absorption tests; Shrinkage test (IEC 60811-1-3:1993 + A1:2001); German version EN 60811-1-3:1995 + A1:2001 |
| DIN EN 60811-1-4-2002 | Insulating and sheathing materials of electric and optical cables - Common test methods - Part 1-4: General application; Tests at low temperature (IEC 60811-1-4:1985 + Corrigendum May 1986 + A1:1993 + A2:2001); German version EN 60811-1-4:1995 + A2:2001 |
| DIN EN 60811-2-1-2002 | Insulating and sheathing materials of electric and optical cables - Common test methods - Part 2-1: Methods specific to elastomeric compounds; Ozone resistance, hot set and mineral oil immersion tests (IEC 60811-2-1:1998 + A1:2001); German version EN 60811-2-1:1998 + A1:2001 |
| DIN EN 60811-3-1-2002 | Insulating and sheathing materials of electric cables - Common test methods - Part 3-1: Methods specific to PVC compounds - Pressure test at high temperature, test for resistance to cracking (IEC 60811-3-1:1985 + Corrigendum:1986 + A1:1994 + A2:2001); German version EN 60811-3-1:1995 + A1:1996 + A2:2001 |
| DIN EN 60811-3-2-2004 | Insulating and sheathing materials of electric and optical cables - Common test methods - Part 3-2: Methods specific to PVC compounds - Loss of mass test - Thermal stability test (IEC 60811-3-2:1985 + Corr. 1986 + A1:1993 + A2:2003); German version EN 60811-3-2:1995 + A2:2004 |
| DIN EN 60811-4-1-2005 | Insulating and sheathing materials of electric and optical cables - Common test methods - Part 4-1: Methods specific to polyethylene and polypropylene compounds - Resistance to environmental stress cracking - Measurement of the melt flow index - Carbon black and/or mineral filler content measurement in polyethylene by direct combustion - Measurement of carbon black content by thermogravimetric analysis (TGA) - Assessment of carbon black dispersion in polyethylene using a microscope (IEC 60811-4-1:2004); German version EN 60811-4-1:2004 |
| DIN EN 60811-4-2-2005 | Insulating and sheathing materials of electric and optical cables - Common test methods - Part 4-2: Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature - Wrapping test after conditioning at elevated temperature - Wrapping test after thermal ageing in air - Measurement of mass increase - Long-term stability test - Test method for copper-catalyzed oxidative degradation (IEC 60811-4-2:2004); German version EN 60811-4-2:2004 |
| DIN EN 60811-5-1-2004 | Insulating and sheathing materials of electric and optical cables - Common test methods - Part 5-1: Methods specific to filling compounds - Drop point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23 °C - D.C. resistivity at 23 °C and 100 °C (IEC 60811-5-1:1990, modified + A1:2003); German version EN 60811-5-1:1999 + A1:2004 |
| DIN EN 60874-1-2001 | Connectors for optical fibres and cables - Part 1: Generic specification (IEC 60874-1:1999); German version EN 60874-1:1999 |
| DIN EN 60885-2-2004 | Electrical test methods for electric cables - Part 2: Partial discharge tests (IEC 60885-2:1987); German version EN 60885-2:2003 |
| DIN EN 60885-3-2004 | Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurements on lengths of extruded power cables (IEC 60885-3:1988); German version EN 60885-3:2003 |
| DIN EN 60966-1-1999 | Radio frequency and coaxial cable assemblies - Part 1: Generic specification; general requirements and test methods (IEC 60966-1:1999); German version EN 60966-1:1999 |
| DIN EN 60966-2-1-2004 | Radio frequency and coaxial cable assemblies - Part 2-1: Sectional specification for flexible coaxial cable assemblies (IEC 60966-2-1:2003); German version EN 60966-2-1:2003 |
| DIN EN 60966-2-2-2004 | Radio frequency and coaxial cable assemblies - Part 2-2: Blank detail specification for flexible coaxial cable assemblies (IEC 60966-2-2:2003); German version EN 60966-2-2:2003 |
| DIN EN 60966-2-3-2004 | Radio frequency and coaxial cable assemblies - Part 2-3: Detail specification for flexible coaxial cable assemblies (IEC 60966-2-3:2003); German version EN 60966-2-3:2003 |
| DIN EN 60966-2-4-2003 | Radio frequency and coaxial cables assemblies - Part 2-4: Detail specification cable assemblies for radio and TV receivers; Frequency range 0 to 3000 MHz, IEC 61169-2 connectors (IEC 60966-2-4:2003); German version EN 60966-2-4:2003 |
| DIN EN 60966-2-5-2003 | Radio frequency and coaxial cable assemblies - Part 2-5: Detail specification for cable assemblies for radio and TV receivers; Frequency range 0 to 1000 MHz, IEC 61169-2 connectors (IEC 60966-2-5:2003); German version EN 60966-2-5:2003 |
| DIN EN 60966-2-6-2003 | Radio frequency and coaxial cable assemblies - Part 2-6: Detail specification for cable assemblies for radio and TV receivers; Frequency range 0 to 3000 MHz, IEC 61169-24 connectors (IEC 60966-2-6:2003); German version EN 60966-2-6:2003 |
| DIN EN 60966-3-1-2004 | Radio frequency and coaxial cable assemblies - Part 3-1: Blank detail specification for semi-flexible coaxial cable assemblies (IEC 60966-3-1:2003); German version EN 60966-3-1:2003 |
| DIN EN 60966-3-2-2004 | Radio frequency and coaxial cable assemblies - Part 3-2: Detail specification for semi-flexible coaxial cable assemblies for GSM use (0,8 GHz - 1 GHz) (IEC 60966-3-2:2003); German version EN 60966-3-2:2003 |
| DIN EN 60966-3-2004 | Radio frequency and coaxial cable assemblies - Part 3: Sectional specification for semi-flexible coaxial cable assemblies (IEC 60966-3:2003); German version EN 60966-3:2003 |
| DIN EN 60966-4-1-2004 | Radio frequency and coaxial cable assemblies - Part 4-1: Blank detail specification for semi-rigid coaxial cable assemblies (IEC 60966-4-1:2003); German version EN 60966-4-1:2003 |
| DIN EN 60966-4-2004 | Radio frequency and coaxial cable assemblies - Part 4: Sectional specification for semi-rigid coaxial cable assemblies (IEC 60966-4:2003); German version EN 60966-4:2003 |
| DIN EN 60974-12-2006 | Arc welding equipment - Part 12: Coupling devices for welding cables (IEC 60974-12:2005); German version EN 60974-12:2005 |
| DIN EN 61034-1-2006 | Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus (IEC 61034-1:2005); German version EN 61034-1:2005 |
| DIN EN 61034-2-2006 | Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements (IEC 61034-2:2005); German version EN 61034-2:2005 |
| DIN EN 61076-3-103-2004 | Connectors for electronic equipment - Part 3-103: Rectangular connectors - Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC) (IEC 61076-3-103:2003); German version EN 61076-3-103:2004 |
| DIN EN 61076-4-108-2002 | Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality; Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1 (IEC 61076-4-108:2002); German version EN 61076-4-108:2002 |
| DIN EN 61076-4-110-2002 | Connectors for electronic equipment - Part 4-110: Printed board connectors with assessed quality; Detail specification for latched cable connector system having a basic grid of 2,0 mm, including full shielding and latching function (IEC 61076-4-110:2001); German version EN 61076-4-110:2002 |
| DIN EN 61076-7-001-2005 | Connectors for electronic equipment - Part 7-001: Cable outlet accessories - Blank detail specification (IEC 61076-7-001:2004); German version EN 61076-7-001:2004 |
| DIN EN 61076-7-2001 | Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualifications and capability approval; Sectional specification (IEC 61076-7:2000); German version EN 61076-7:2000 |
| DIN EN 61138-2004 | Cables for portable earthing and short-circuiting equipment (IEC 61138:1994 + A1:1995); German version EN 61138:1997 + A11:2003 |
| DIN EN 61169-24-2002 | Radio-frequency connectors - Part 24: Sectional specification; Radio frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (type F) (IEC 61169-24:2001); German version EN 61169-24:2001 |
| DIN EN 61196-2-2004 | Radio-frequency cables - Part 2: Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation (IEC 61196-2:1995); German version EN 61196-2:2003 |
| DIN EN 61196-3-1999 | Radio frequency cables - Part 3: Sectional specification for coaxial cables for local area networks (IEC 61196-3:1998); German version EN 61196-3:1998 |
| DIN EN 61196-3-2-1998 | Radio frequency cables - Part 3-2: Coaxial cables for digital communication in horizontal floor wiring; detail specification for coaxial cables with solid dielectric for local area networks of 185 m reach and up to 10 Mb/s (IEC 61196-3-2:1997); German version EN 61196-3-2:1997 |
| DIN EN 61196-3-3-1998 | Radio frequency cables - Part 3-3: Coaxial cables for digital communication in horizontal floor wiring; Detail specification for coaxial cables with foamed dielectric for local area networks of 185 m reach and up to 10 Mb/s (IEC 61196-3-3:1997); German version EN 61196-3-3:1997 |
| DIN EN 61196-4-2004 | Coaxial communication cables - Part 4: Sectional specification for radiating cables (IEC 61196-4:2004); German version EN 61196-4:2004 |
| DIN EN 61238-1-2004 | Compression and mechanical connectors for power cables for rated voltages up to 36 kV (Um = 42 kV) - Part 1: Test methods and requirements (IEC 61238-1:2003); German version EN 61238-1:2003 |
| DIN EN 61280-4-1-2004 | Fibre optic communication subsystem test procedures - Part 4-1: Cable plant and links - Multimode fibre-optic cable plant attenuation measurement (IEC 61280-4-1:2003); German version EN 61280-4-1:2004 |
| DIN EN 61280-4-2-2001 | Fibre optic communication subsystem basic test procedures - Part 4-2: Fibre optic cable plant - Single-mode fibre optic cable plant attenuation (IEC 61280-4-2:1999); German version EN 61280-4-2:1999 |
| DIN EN 61300-2-35-1998 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-35: Tests; cable nutation (IEC 61300-2-35:1995); German version EN 61300-3-35:1997 |
| DIN EN 61300-2-37-1998 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-37: Tests; cable bending for closures (IEC 61300-2-37:1995); German version EN 61300-2-37:1997 |
| DIN EN 61300-2-4-1998 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests: Fibre/cable retention (IEC 61300-2-4:1995); German version EN 61300-2-4:1997 |
| DIN EN 61313-1-1997 | Fibre optic passive components and cable assemblies - Part 1: Capability approval; Generic specification (IEC 61313-1:1995); German version EN 61313-1:1997 |
| DIN EN 61316-2000 | Industrial cable reels (IEC 61316:1999); German version EN 61316:1999 |
| DIN EN 61386-21-2004 | Conduit systems for cable management - Part 21: Particular requirements - Rigid conduit systems (IEC 61386-21:2002); German version EN 61386-21:2004 |
| DIN EN 61386-22-2004 | Conduit systems for cable management - Part 22: Particular requirements - Pliable conduit systems (IEC 61386-22:2002); German version EN 61386-22:2004 |
| DIN EN 61386-23-2004 | Conduit systems for cable management - Part 23: Particular requirements - Flexible conduit systems (IEC 61386-23:2002); German version EN 61386-23:2004 |
| DIN EN 61442-2006 | Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 36 kV (Um = 42 kV) (IEC 61442:2005, modified); German version EN 61442:2005 |
| DIN EN 61515-1996 | Mineral insulated thermocouple cables and thermocouples (IEC 61515:1995); German version EN 61515:1996 |
| DIN EN 61537-2002 | Cable tray systems and cable ladder systems for cable management (IEC 61537:2001); German version EN 61537:2001 |
| DIN EN 61726-2000 | Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method (IEC 61726:1999); German version EN 61726:2000 |
| DIN EN 62012-1-2003 | Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments - Part 1: Generic specification (IEC 62012-1:2002); German version EN 62012-1:2002 |
| DIN EN 62037-2000 | RF connectors, connector cable assemblies and cables - Intermodulation level measurement (IEC 62037:1999); German version EN 62037:1999 |
| DIN EN 62153-1-1-2004 | Metallic communication cables test methods - Part 1-1: Electrical - Measurement of the pulse/step return loss in the frequency domain using the Inverse Discrete Fourier Transformation (IDFT) (IEC 62153-1-1:2003); German version EN 62153-1-1:2004 |
| DIN EN 62153-4-2-2004 | Metallic communication cables test methods - Part 4-2: Electromagnetic compatibility (EMC) - Screening and coupling attenuation - Injection clamp method (IEC 62153-4-2:2003); German version EN 62153-4-2:2004 |
| DIN EN ISO 10807-1997 | Pipework - Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmospheres (ISO 10807:1994); German version EN ISO 10807:1996 |
| DIN EN ISO 5828-2001 | Resistance welding equipment - Secondary connecting cables with terminals connected to water-cooled lugs - Dimensions and characteristics (ISO 5828:2001); German version EN ISO 5828:2001 |
| DIN EN ISO 6551-1996 | Petroleum liquids and gases - Fidelity and security of dynamic measurement - Cabled transmission of electric and/or electronic pulsed data (ISO 6551:1982); German version EN ISO 6551:1995 |
| DIN EN ISO 8205-1-2003 | Water-cooled secondary connection cables for resistance welding - Part 1: Dimensions and requirements for double-conductor connection cables (ISO 8205-1:2002); German version EN ISO 8205-1:2002 |
| DIN EN ISO 8205-2-2003 | Water-cooled secondary connection cables for resistance welding - Part 2: Dimensions and requirements for single-conductor connection cables (ISO 8205-2:2002); German version EN ISO 8205-2:2002 |
| DIN EN ISO 8205-3-1997 | Water-cooled secondary connection cables for resistance welding - Part 3: Test requirements (ISO 8205-3:1993); German version EN ISO 8205-3:1996 |
| DIN ETS 300800-2000 | Digital Video Broadcasting (DVB) - DVB interaction channel for cable TV distribution systems (CATV) (Endorsement of the English version ETS 300800:1998 as German standard) |
| DIN IEC 60304-1987 | Standard colours for insulation for low-frequency cables and wires; identical with IEC 60304, edition 1982 |
| DIN ISO 2574-1999 | Aerospace series - Aircraft electrical cables - Manufacturer's identification marking (ISO 2574:1994) |
| DIN V 16877-2002 | Pipes and fittings of polypropylene (PP) for cable ducting - Dimensions and technical delivery conditions |
| DIN V 4001-1401-1988 | CAD standard parts file; specification of geometry and parameters; cable sockets for screw and snap connection |
| DIN VDE 0100 Bb.5-1995 | Erection of power installations with nominal voltages up to 1000 V - Permissible lengths of cables and cords taking into consideration protection against electric shock in case of fault, short circuit or voltage drop |
| DIN VDE 0100-430-1991 | Erection of power installations with nominal voltages up to 1000 V; protective measures; protection of cable and cords against overcurrent |
| DIN VDE 0100-520 Bb.1-1994 | Erection of power installations with nominal voltages up to 1000 V - Electrical installation guide - Selection and erection of electrical equipment; wiring systems; limitation of temperatures rises of connecting interfaces; German version R 064-002 |
| DIN VDE 0100-520 Bb.2-2002 | Erection of low voltage installations - Permissible current-carrying capacities, protection against overload, permissible lengths of cables and cords taking into consideration voltage drop and conditions for automatic disconnection of supply |
| DIN VDE 0100-732-1995 | Erection of power installations with nominal voltages up to 1000 V - Part 732: Cables entries into buildings in public cable networks |
| DIN VDE 0207 Bb.1-2005 | Insulating and sheathing compounds for cables and flexible cords - List of the standards of the series DIN VDE 0207 (VDE 0207) |
| DIN VDE 0207-20-1993 | Insulating and sheathing compounds for cables and flexible cords; rubber insulating compounds |
| DIN VDE 0207-21-1993 | Insulating and sheathing compounds for cables and flexible cords; rubber sheathing compounds |
| DIN VDE 0207-24-1986 | Insulating and sheathing compounds for cables and flexible cords; halogen-free sheathing compounds |
| DIN VDE 0207-4-1986 | Insulating and sheathing compounds for cables and flexible cords; PVC insulating compounds |
| DIN VDE 0207-5-1986 | Insulating and sheathing compounds for cables and flexible cords; PVC sheathing compounds |
| DIN VDE 0207-6-2004 | Insulating and sheathing compounds for cables and flexible cords - Fluorinated polymers |
| DIN VDE 0220-3-1977 | Specifications for single- and multiple cable clamps with insulating parts in electrical power cable installations up to 1000 V |
| DIN VDE 0250-1-1981 | Specifications for cables, wires and flexible cords for power installations; general |
| DIN VDE 0250-102-1991 | Cables, wires and flexible cords for power installation; PVC-insulated twin-cable for internal wiring |
| DIN VDE 0250-106-1982 | Cables, wires and flexible cords for power installation; ETFE single-core-non-sheated cables for internal wiring VDE Specification |
| DIN VDE 0250-201-1992 | Cables and flexible cords for power installation; flat webbed house wires |
| DIN VDE 0250-204-2000 | Cables, wires and cords for power installation - PVC-Installation cable NYM |
| DIN VDE 0250-206-1983 | Cables, wires and flexible cords for power installation; PVC-sheathed cable with suspension strand [VDE Specification] |
| DIN VDE 0250-210-1985 | Cables, wires and flexible cords for power installation; lead-sheathed cable |
| DIN VDE 0250-212-1982 | Cables, wires and flexible cords for power installation; screened PVC-cables U<(Index)0>/U 3,6/6 kV VDE Specification |
| DIN VDE 0250-213-1986 | Cables, wires and flexible cords for power installation; roof poles lead-in cable |
| DIN VDE 0250-214-2002 | Cables, wires and cords for power installation - Part 214: Installation cable NHXMH with improved properties in the event of fire |
| DIN VDE 0250-215-2002 | Cables, wires and cords for power installation - Part 215: Installation cable NHMH with special properties in the event of fire |
| DIN VDE 0250-502-1985 | Cables, wires and flexible cords for power installation; heat-resistant silicone wire |
| DIN VDE 0250-602-1985 | Cables, wires and flexible cords for power installation; special rubber-insulated single-core cables |
| DIN VDE 0250-802-1985 | Cables, wires and flexible cords for power installation; flexible cable for theatres |
| DIN VDE 0250-806-1992 | Cables, wires and flexible cords for power installation; polychloroprene-sheathed cable NMHV?U |
| DIN VDE 0250-809-1985 | Cables, wires and flexible cords for power installation; flat ordinary tough-polychloreprene-sheathed flexible cable |
| DIN VDE 0250-811-1985 | Cables, wires and flexible cords for power installation; rubber insulated flexible cable NSHC?U |
| DIN VDE 0250-812-1985 | Cables, wires and flexible cords for power installation; rubber insulated flexible cable NSSH?U |
| DIN VDE 0250-813-1985 | Cables, wires and flexible cords for power installation; trailing cable |
| DIN VDE 0250-814-1985 | Cables, wires and flexible cords for power installation; rubber insulated flexible cable NSHT?U |
| DIN VDE 0253-1987 | Heating cables |
| DIN VDE 0262-1995 | XLPE insulated and PVC sheathed installation-cables with nominal voltage 0,6/1 kV |
| DIN VDE 0265-1995 | Cables with plastic-insulation and lead-sheath for power installation |
| DIN VDE 0266 Berichtigung 1-2006 | Power cables with improved characteristics in the case of fire - Nominal voltages U<(Index)0>/U 0,6/1 kV, Corrigenda to DIN VDE 0266 (VDE 0266):2000-03 |
| DIN VDE 0266-2000 | Power cables with improved characteristics in the case of fire - Nominal voltages U<(Index)0>/U 0,6/1 kV |
| DIN VDE 0271-2004 | Power cables - Specifications for power cables 0,6/1 kV and above for special applications |
| DIN VDE 0276-1000-1995 | Power cables - Part 1000: Current-carrying capacity, general, conversion factors |
| DIN VDE 0276-603 Berichtigung 2-2006 | Power cables - Part 603: Distribution cables of rated voltage U<(Index)0>/U 0,6/1 kV; German version HD 603 S1:1994/A2:2003, Corrigenda to DIN VDE 0276-603 (VDE 0276-603):2005-01 |
| DIN VDE 0276-603-2005 | Power cables - Part 603: Distribution cables of rated voltage U<(Index)0>/U 0,6/1 kV; German version HD 603 S1:1994/A2:2003 |
| DIN VDE 0276-604-1995 | Power cables - Part 604: Power cables of nominal voltages U<(Index)0>/U 0,6/1 kV with special fire performance for use in power stations; German version HD 604 S1 Part 1 and Part 5G:1994 |
| DIN VDE 0276-605-1995 | Power cables - Part 605: Additional test methods; German version HD 605 S1:1994 |
| DIN VDE 0276-605/A1-1996 | Electric cables - Part 605: Additional test methods; German version HD 605 S1:1994/A1:1996 |
| DIN VDE 0276-620-1996 | Power cables - Part 620: Distribution cables of nominal voltages U<(Index)0>/U 3,6/6 kV to 20,8/36 kV; German version HD 620 S1 Parts 1, 3C, 4C, 5C und 6C:1996 |
| DIN VDE 0276-621-1997 | Power cables - Part 621: Medium voltage impregnated paper insulated distribution cables; German version HD 621 S1:1996 Parts 1, 2, 3C and 4C |
| DIN VDE 0276-622-2006 | Power cables - Part 622: Power cables having rated voltages from 3,6/6 (7,2) kV up to and including 20,8/36 (42) kV with special fire performance for use in power stations; German version HD 622 S1:1996 + A1:2000 + A2:2005, Part 1 and Part 4D |
| DIN VDE 0276-626-1997 | Power cables - Overhead distribution cables of rated voltage U<(Index)0>/U(U<(Index)m>):0,6/1 (1,2) kV; German version HD 626 S1 Parts 1, 2 and 4 F-1:1996 |
| DIN VDE 0276-626/A1-1998 | Power cables - Overhead distribution cables of rated voltage U<(Index)0>/U(U<(Index)m>): 0,6/1 (1,2) kV; Amendment A1; German version HD 626 S1/A1:1997 |
| DIN VDE 0276-632-1999 | Power cables with extruded insulation and their accessories for rated voltages above 36 kV (U<(Index)m> = 42 kV) up to 150 kV (U<(Index)m> = 170 kV); German version HD 632 S1 Parts 1, 3D, 4D and 5D:1998 |
| DIN VDE 0276-633-1999 | Tests on oil-filled (fluid-filled), paper- and polypropylene paper laminate-insulated, metal-sheathed cables and accessories for alternating voltages up to and including 400 kV (U<(Index)m>=420 kV); German version HD 633 S1 Parts 1 and 3D:1997 |
| DIN VDE 0276-634-1999 | Tests on internal gas-pressure cables and accessories for alternating voltages up to and including 275 kV (U<(Index)m>=300 kV); German version HD 634 S1 Parts 1 and 3C:1997 |
| DIN VDE 0276-635-1999 | Tests on external gas-pressure (gas compression) cables and accessories for alternating voltages up to and including 275 kV (U<(Index)m>=300 kV); German version HD 635 S1 Parts 1 and 3C:1997 |
| DIN VDE 0278-629-1-2002 | Power cable accessories with rated voltages U up to 30 kV (U<(Index)m> up to 36 kV) - Part 629-1: Test requirements on accessories for use on power cables of rated voltage from 3,6/6 (7,2) kV up to 20,8/36 (42) kV; Cables with extruded insulation; German version HD 629.1 S1:1996 + A1:2001 |
| DIN VDE 0278-629-2-2002 | Power cable accessories with rated voltages U up to 30 kV (U<(Index)m> up to 36 kV) - Part 629-2: Test requirements on accessories for use on power of rated voltages from 3,6/6 (7,2) kV up to 20,8/36 (42) kV; Cables with impregnated paper insulation; German version HD 629.2 S1:1997 + A1:2001 |
| DIN VDE 0278-631-1-1999 | Material characterisation - Part 1: Compounds for use in cable accessories: Resinous compounds before cure and in the cured state; German version HD 631.1.S1:1998 |
| DIN VDE 0279-1982 | Accessories for underground mining cables; joint boxes U<(Index)0>/U=0,6/1 kV VDE Specification |
| DIN VDE 0281-1-2003 | Cables of rated voltages up to and including 450/750 V and having thermoplastic insulation - Part 1: General requirements; German version HD 21.1 S4:2002 |
| DIN VDE 0281-10-2003 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 10: Extensible leads; German version HD 21.10 S2:2001 |
| DIN VDE 0281-11-2003 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 11: Cables for luminaires; German version HD 21.11 S1:1995 + A1:2001 |
| DIN VDE 0281-12-2003 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 12: Heat-resistant flexible cables (cords); German version HD 21.12 S1:1994 + A1:2001 |
| DIN VDE 0281-13-2003 | Polyvinyl chloride insulated cables for rated voltages up to and including 450/750 V - Part 13: Oil resistant PVC sheathed cables with two or more conductors; German version HD 21.13 S1:1995 + A1:2001 |
| DIN VDE 0281-14-2004 | Cables of rated voltage up to and including 450/750 V and having thermoplastic insulation - Part 14: Flexible cables (cords), insulated and sheathed with halogen-free thermoplastic compounds; German version HD 21.14 S1:2003 |
| DIN VDE 0281-3-2001 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non sheathed cables for fixed wiring; German version HD 21.3 S3:1995 + A1:1999 |
| DIN VDE 0281-404-1989 | PVC cables, wires and flexible cords for power installation; flat PVC-sheathed flexible cable 07VVH6 |
| DIN VDE 0281-5-2002 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords) (IEC 60227-5:1979, modified); German version HD 21.5 S3:1994 + A1:1999 + A2:2001 |
| DIN VDE 0281-7-2001 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Single core non-sheathed cables for internal wiring for a conductor temperature of 90 °C; German version HD 21.7 S2:1996 + A1:1999 |
| DIN VDE 0281-8-2000 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 8: Single core non-sheathed cables for decorative chains; German version HD 21.8 S2:1999 |
| DIN VDE 0281-9-2001 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 9: Single core non-sheathed cables for installation at low temperatures; German version HD 21.9 S2:1995 + A1:1999 |
| DIN VDE 0282-1-2003 | Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 1: General requirements; German version HD 22.1 S4:2002 |
| DIN VDE 0282-10-2000 | Rubber insulated cables of rated voltages up to and including 450/750 V - Part 10: EPR insulated and polyurethane sheathed flexible cable; German version HD 22.10 S1:1994 + A1:1999 |
| DIN VDE 0282-11-2000 | Rubber insulated cables of rated voltages up to and including 450/750 V - Part 11: EVA cords and flexible cables; German version HD 22.11 S1:1995 + A1:1999 |
| DIN VDE 0282-12-2000 | Rubber insulated cables of rated voltages up to and including 450/750 V - Part 12: Heat resistant EPR cords and flexible cables; German version HD 22.12 S1:1996 + A1:1999 |
| DIN VDE 0282-13-2000 | Rubber insulated cables of rated voltages up to and including 450/750 V - Part 13: Single and multicore flexible cables, insulated and sheathed with crosslinked polymer and having low emission of smoke and corrosive gases; German version HD 22.13 S1:1996 + A1:2000 |
| DIN VDE 0282-14-2003 | Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 14: Cords for applications requiring high flexibility; German version HD 22.14 S2:2002 |
| DIN VDE 0282-15-2000 | Rubber insulated cables of rated voltages up to and including 450/750 V - Part 15: Multicore cables insulated and sheated with heat resistant silicone; German version HD 22.15 S1:1999 |
| DIN VDE 0282-16-2000 | Rubber insulated cables of rated voltages up to and including 450/750 V - Part 16: Water resistant polychloroprene or equivalent synthetic elastomer sheathed cables; German version HD 22.16 S1:2000 |
| DIN VDE 0282-3-2005 | Cables of rated voltages up to and including 450/750 V and having crosslinked insulation - Part 3: Heat resistant silicone rubber insulated cables; German version HD 22.3 S4:2004 |
| DIN VDE 0282-4 Berichtigung 1-2005 | Cables of rated voltages up to and including 450/750 V and having crosslinked insulation - Part 4: Cords and flexible cables; German version HD 22.4 S4:2004; Corrigenda to DIN VDE 0282-4 (VDE 0282-4):2005-02 |
| DIN VDE 0282-4-2005 | Cables of rated voltages up to and including 450/750 V and having crosslinked insulation - Part 4: Cords and flexible cables; German version HD 22.4 S4:2004 |
| DIN VDE 0282-6-2005 | Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 6: Arc welding cables; German version HD 22.6 S2:1995 + A1:1999 + A2:2004 |
| DIN VDE 0282-7-2005 | Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 7: Cables with increased heat resistance for internal wiring for a conductor temperature of 110 °C; German version HD 22.7 S2:1995 + A1:1999 + A2:2004 |
| DIN VDE 0282-8-2005 | Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 8: Polychloroprene or equivalent synthetic elastomer sheathed cable for decorative chains; German version HD 22.8 S2:1994 + A1:1999 + A2:2004 |
| DIN VDE 0282-807-1994 | Rubber insulated cables, wires and flexible cords for power installation; rubber insulated lift cables 05RT and 05RN |
| DIN VDE 0282-808-1994 | Rubber insulated cables, wires and flexible cords for power installation; rubber insulated lift cables 07RT and 07RN |
| DIN VDE 0282-9-2000 | Rubber insulated cables of rated voltages up to and including 450/750 V - Part 9: Single core non-sheathed cables for fixed wiring having low emission of smoke and corrosive gases; German version HD 22.9 S2:1995 + A1:1999 |
| DIN VDE 0284-3-2002 | Mineral insulated cables with a rated voltage not exceeding 750 V - Part 3: Guide to use; German version HD 586.3 S1:2001 |
| DIN VDE 0289-1-1988 | Definitions for cables, wires and flexible cords for power installation; general definitions |
| DIN VDE 0289-2-1988 | Definitions for cables, wires and flexible cords for power installations; structural elements |
| DIN VDE 0289-3-1988 | Definitions for cables, wires and flexible cords for power installation; manufacturing processes |
| DIN VDE 0289-4-1988 | Definitions for cables, wires and flexible cords for power installation; testing |
| DIN VDE 0289-5-1988 | Definitions for cables, wires and flexible cords for power installations; lengths |
| DIN VDE 0289-6-1993 | Definitions for cables, wires and flexible cords for power installation; accessories |
| DIN VDE 0289-7-1988 | Definitions for cables, wires and flexible cords for power installation; installations |
| DIN VDE 0289-8-1988 | Definitions for cables, wires and flexible cords for power installation; current-carrying capacity |
| DIN VDE 0291-1-1972 | Specifications for filling compounds for cable accessories and for scalding compounds; Hot-cast filling compounds, filling-compounds for cold pressing-in, two-component cold-cast filling compounds and scalding compounds |
| DIN VDE 0291-1a-1973 | Specifications for filling compounds for cable accessories and for scalding compounds; Amendment to VDE 0291 Part 1/2.72 |
| DIN VDE 0291-2-1979 | Compounds for use in cable accessories; casting resinous compounds before cure and in the cured state VDE Specification |
| DIN VDE 0292-1999 | System for cable designation; German version HD 361 S3:1999 |
| DIN VDE 0293-308-2003 | Identification of cores in cables and flexible cords by colours; German version HD 308 S2:2001 |
| DIN VDE 0298-3-2006 | Application of cables and cords in power installations - Part 3: Guide to use of non-harmonized cables |
| DIN VDE 0298-300-2004 | Application of cables and cords in power installations - Part 300: Guide to use of low voltage harmonized cables; German version HD 516 S2:1997 + A1:2003 |
| DIN VDE 0298-4-2003 | Application of cables and cords in power installations - Part 4: Recommended current-carrying capacity for sheathed and nonsheathed cables for fixed wirings in and around buildings and for flexible cables and cords |
| DIN VDE 0299-1-1986 | Calculation method on the basis of fictitious diameters for determination of dimensions of protective coverings for cables and flexible cords for power installations; part 1: power cables |
| DIN VDE 0472 Bb.1-2005 | Testing of cables, wires and flexible cords - List of the standards series DIN VDE 0472 (VDE 0472) |
| DIN VDE 0472-505-1983 | Testing of cables, wires and flexible cords; loss factor, dielectric loss coefficient and leakance [VDE Specification] |
| DIN VDE 0472-506-1983 | Testing of cables, wires and flexible cords; capacitance unbalance [VDE Specification] |
| DIN VDE 0472-507-1983 | Testing of cables, wires and flexible cords; reduction factor [VDE Specification] |
| DIN VDE 0472-509-1986 | Testing of cables, wires and flexible cords; dielectric strenght on cables, wires and cords for telecommunication systems |
| DIN VDE 0472-512-1985 | Testing of cables, wires and flexible cords; resistance between protective conductor and semi-conductive layer |
| DIN VDE 0472-604-1985 | Testing of cables, wires and flexible cords; tightness of cables sheaths |
| DIN VDE 0472-613-1985 | Testing of cables, wires and flexible cords; tear resistance |
| DIN VDE 0472-619-1983 | Testing of cables, wires and flexible cords; indentation strength VDE Specification |
| DIN VDE 0472-621-1983 | Testing of cables, wires and flexible cords; crystallite melting point VDE Specification |
| DIN VDE 0472-623-1983 | Testing of cables, wires and flexible cords; elongation at break of copper conductor [VDE Specification] |
| DIN VDE 0472-625-1983 | Testing of cables, wires and flexible cords; traction relief for cables and insulated wires by strain-bearing elements [VDE Specification] |
| DIN VDE 0472-626-1983 | Testing of cables, wires and flexible cords; breaking lenght [VDE Specification] |
| DIN VDE 0472-631-1987 | Testing of cables, insulated wires and flexible cords; shore D handness test |
| DIN VDE 0472-632-1987 | Testing of cables, wires and flexible cords; behaviour at high temperatures |
| DIN VDE 0472-705-1987 | Testing of cables, wires and flexible cords; indirect carbon black determination for PVC-sheaths |
| DIN VDE 0472-801-1986 | Testing of cables, wires and flexible cords; quality of zinc coatings |
| DIN VDE 0472-812-1984 | Testing of cables, wires and flexible cords; continuity of metallic coatings [VDE Specification] |
| DIN VDE 0472-814-1991 | Testing of cables, wires and flexible cords; continuance of isolation effect under fire conditions |
| DIN VDE 0472-815-1989 | Testing of cables, wires and flexible cords; non-halogen verification |
| DIN VDE 0532-222-1997 | Three-phase oil-immersed distribution transformers 50 Hz, from 50 to 2500 kVA, with highest voltage for equipment not exceeding 36 kV - Part 2: Distribution transformers with cable boxes on the high-voltage and/or low-voltage side; section 2: Cable boxes type 1 for use on distribution transformers meeting the requirements of HD 428.2.1 S1; German version HD 428.2.2 S1:1997 |
| DIN VDE 0532-223-1998 | Three-phase oil-immersed distribution transformers 50 Hz, from 50 to 2500 kVA, with highest voltage for equipment not exceeding 36 kV - Part 2: Distribution transformers with cable boxes on the high-voltage and/or low-voltage side; Section 3: Cable boxes type 2 for use on distribution transformers meeting the requirements of HD 428.2.1; German version HD 428.2.3 S1:1998 |
| DIN VDE 0813-1988 | Switchboard cables for telecommunication and data processing systems |
| DIN VDE 0815-1985 | Wiring cables for telecommunication and data processing systems |
| DIN VDE 0815/A1-1988 | Wiring cables for telecommunication and data processing systems; amendment 1 |
| DIN VDE 0816-1-1988 | External cables for telecommunication and data processing systems; cables insulated and sheathed with polyethylen, unit stranded |
| DIN VDE 0816-2-1988 | External cables for telecommunication and data processing systems; signal and measuring cables, mining cables |
| DIN VDE 0816-3-1988 | External cables for telecommunication and data processing systems; paper insulated cables |
| DIN VDE 0817-1990 | Cables with stranded conductors for increased mechanical stress for telecommunications systems and data processing systems |
| DIN VDE 0818-1983 | Self supporting telecommunication aerial cables on overhead power lines above 1 kV [VDE-Specification] |
| DIN VDE 0819-5-1997 | Sectional specification for equipment cables to be used for digital analogue communication; German version HD 609 S1:1995 |
| DIN VDE 0888-3-1999 | Optical fibre cables for communication systems - Part 3: Outdoor cables |
| DIN VDE 0888-4-1999 | Optical fibre cables for communication systems - Part 4: Indoor cables with one fibre |
| DIN VDE 0888-5-1999 | Optical fibre cables for communication systems - Part 5: Outdoor fan out cables |
| DIN VDE 0888-6-1999 | Optical fibre cables for communication systems - Part 6: Indoor cables with several fibres |
| DIN VDE 0891-1-1990 | Use of cables and insulated wires for telecommunication systems and information processing systems; general directions |
| DIN VDE 0891-2-1990 | Use of cables and insulated wires for telecommunication systems and information processing systems; special directions for equipment wires with solid or stranded conductors according to DIN VDE 0812 |
| DIN VDE 0891-3-1990 | Use of cables and insulated wires for telecommunication systems and information processing systems; special directions for switchbord cables according to DIN VDE 0813 |
| DIN VDE 0891-4-1981 | Use of cables and insulated wires for telecommunication systems and information processing systems; special direction for cords according to DIN 57814/VDE 0814 [VDE-Guide] |
| DIN VDE 0891-5-1985 | Use of cables and insulated wires for telecommunication systems and data processing systems; special direction for wiring cables according to DIN VDE 0815 |
| DIN VDE 0891-6-1990 | Use of cables and insulated wires for telecommunication systems and information processing systems; special directions for external cables according to DIN VDE 0816 part 1 to part 3 |
| DIN VDE 0891-7-1984 | Use of cables and insulated wires for telecommunication systems and data processing systems; special direction for cables with stranded conductors, for increased mechanical stress for telecommunication systems and data processing systems according to DIN 57817/VDE 0817 [VDE-Guide] |
| DIN VDE 0891-8-1983 | Use of cables and insulated wires for telecommunication systems and informations processing systems; special direction for self supporting telecommunication aerial cables on overhead power lines above 1 kV according to DIN 57818/VDE 0818 [VDE-Guide] |
| DIN VDE 0891-9-1990 | Use of cables and insulated wires for telecommunication systems and information processing systems; special directions for equipment wires and stranded connecting wires with extended temperature range according to DIN VDE 0881 |
